Homogenized Line, Conduction-Cooled 880nm
2Pages

{{requestButtons}}

Catalog excerpts

Homogenized Line, Conduction-Cooled 880nm - 1

Conduction-Cooled, Multi-Bar Module with Homogenized Laser Beam Features - Single wavelength Homogenized laser beam Thermal interface by base-plate Scalable output power Optional Accessories - Integrated monitor photo diode - Integrated NTC temperature sensor Device Specification Optical Parameters1 Center Wavelength Tolerance Output Power2 Spectral Width (FWHM) Power Conversion Efficiency Operating Temperature2, 3, 4 (Cooling Plate) Recommended Heat Sink Capacity Beam Size6 Working Distance Homogeneity5 Wavelength Temp. Coefficient Electrical Parameters1 Thermal Parameters Data at 25°C cold plate temperature, unless otherwise stated. Reduced lifetime if used above nominal operating conditions. 3 Others available upon request. 4 A non-condensing environment is required for storage and operation below the ambient dew point. 5 Defined as 1-(Imax-Imin)/(Imax+Imin) within 10.5mm line length. 6 Length is based on 95% power included; width is based on 90% power included. 2

Open the catalog to page 1
Homogenized Line, Conduction-Cooled 880nm - 2

Conduction-Cooled, Multi-Bar Module with Homogenized Laser Beam Package Dimension VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION! CLASS 4 LASER PRODUCT IEC 825-1 610584 ©2012 DILAS. All rights reserved. DILAS reserves the right to change products specifications without notice. For handling precautions, please reference the general handling instruction manual. For complete details, please contact your local DILAS sales representative or visit our website at www.DILAS.com. Europe DILAS Diodenlaser GmbH Galileo-Galilei-Straße 10 55129 Mainz...

Open the catalog to page 2

All DILAS catalogs and technical brochures

  1. Fiber Cables

    1 Pages

  2. 8W CW

    2 Pages