Catalogs >
DILAS >
Fiber Cables

Fiber Cables
1Pages

Catalog excerpts

High Power SMA/SMA Fiber Features - Free standing fiber tip - High centricity Device Specification Parameter Connector Type SMA 905 Both Sides, with Free Standing Fiber Tip. Ferule Diameter Fiber Length Numerical Aperture Numerical Aperture Outer Diameter (Largest Diameter at Connector) Core Diameter Cladding Diameter Long Term Bending Radius (Coil Radius) 3 Short Term Bending Radius Others available upon request. Can differ by ±2%. 3 Minimum value. 2 U.S. CFR Regulation The manufacturer and subsequent sale of laser equipment is under the guidelines governed by the U.S. Center for Devices and Radiological Health (CDRH). In accordance to those guidelines, specifically Subchapter J of the Radiation Standards, 21 CFR, the diode laser is registered as a CLASS 4 laser product. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION! CLASS 4 LASER PRODUCT IEC 825-1 610584 European Commission In accordance to EN 60825, Safety of Laser Products, the diode laser is registered as a CLASS 4 laser product. Products specifications are subject to change without notice. For handling precautions, please reference the general handling instruction manual. For additional information, please contact your local sales representative or visit our website at www.dilas-ils.com. DILAS Industrial Laser Systems a division of DILAS Diodenlaser GmbH Galileo-Galilei-Straße 10 55129 Mainz Germany Phone: +49 (6131) 9226 400 Fax: +49 (6131) 9226 444 Email: sales@dilas-ils.com www.DILAS-ILS.com

Open the catalog to page 1

Fiber Cables 1Pages

Catalog excerpts

All DILAS catalogs and technical brochures

Fiber Cables
1Pages