Catalogs >
DILAS >
Basic Processing Head for SMA/QBH Fiber (PHFx0)

Basic Processing Head for SMA/QBH Fiber (PHFx0)
2Pages

Catalog excerpts

Basic Processing Head for SMA/QBH Fiber (PHFx0) - 1

Processing Head (PHFS0) COMPACT Series Diode Laser System Features This processing head with f=100mm (standard focal length)1 is intended to be used with COMPACT Series. The processing head is connected to the diode laser using a SMA-905 fiber, NA 0.22. Having a compact housing and the mounting thread M40x1 this processing head can easily be integrated into the laser process. Device Specification Optical Numerical Aperture Focal Length Working Distance (Stand Off)1 Output Aperture Focal Size2 (Factor to Multiply with Fiber Core Diameter) Consult DILAS Industrial Laser Systems for other available options. Focal dimensions of diode lasers can deviate in practice depending on measuring method by ±10%. 3 With additional meniscus lens adapter. 2 Spot Size, Table Above U.S. CFR Regulation The manufacturer and subsequent sale of laser equipment is under the guidelines governed by the U.S. Center for Devices and Radiological Health (CDRH). In accordance to those guidelines, specifically Subchapter J of the Radiation Standards, 21 CFR, the diode laser is registered as a CLASS 4 laser product. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION! CLASS 4 LASER PRODUCT IEC 825-1 610584 European Commission In accordance to EN 60825, Safety of Laser Products, the diode laser is registered as a CLASS 4 laser product. Products specifications are subject to change without notice. For handling precautions, please reference the general handling instruction manual. For additional information, please contact your local sales representative or visit our website at www.dilas-ils.com. DILAS Industrial Laser Systems a division of DILAS Diodenlaser GmbH Galileo-Galilei-Straße 10 55129 Mainz Germany Phone: +49 (6131) 9226 400 Fax: +49 (6131) 9226 444 Email: sales@dilas-ils.com www.DILAS-ILS.com

Open the catalog to page 1

Basic Processing Head for SMA/QBH Fiber (PHFx0) - 2

Processing Head (PHFQ0) COMPACT Series Diode Laser System Features This processing head with f=100mm (standard focal length)1 is intended to be used with Compact Series along with an RQB or QBH fiber coupling. The processing head is connected to the diode laser using a fiber connector with RQB/QBH. Having a compact housing this processing head can easily be integrated into the laser process. Device Specification Optical Numerical Aperture Focal Length Working Distance (Stand Off)1 Output Aperture Focal Size2 (Factor to Multiply with Fiber Core Diameter) Consult DILAS Industrial Laser...

Open the catalog to page 2

Basic Processing Head for SMA/QBH Fiber (PHFx0) 2Pages

Catalog excerpts

All DILAS catalogs and technical brochures

Basic Processing Head for SMA/QBH Fiber (PHFx0)
2Pages