8W CW
2Pages

{{requestButtons}}

Catalog excerpts

8W CW - 1

638nm, Conduction-Cooled Single Bars The diode laser company. - Available with fast-axis collimation - Heatsink available only on M10 Device Specification Center Wavelength Tolerance nm ±3 Spectral Width (FWHM) nm <2.0 Slow-Axis Divergence (90%) degree <10 Wavelength Temp. Coefficient nm/°C ~0.16 Power Conversion Efficiency % >25 Recommended Heat Sink Capacity Per Bar W 30 ^ata at 20°C cold plate temperature, unless otherwise stated. 2Reduced lifetime if used above nominal operating conditions. 3Others available upon request. 4A non-condensing environment is required for storage and operation below the ambient dew point. 5For fast-axis collimation using FAC lens: divergence <8mrad.

Open the catalog to page 1
8W CW - 2

638nm, Conduction-Cooled Single Bars Package Dimension Heatsink for MY Diode Laser Bars with Fast-Axis Collimation Lens: Beam heights available: M10 mount = 7.95mm VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION! CLASS 4 LASER PRODUCT IEC 825-1 610584 ©2012 DILAS. All rights reserved. DILAS reserves the right to change product specifications without notice. For handling precautions, please reference the general handling instruction manual. For complete details, please contact your local DILAS sales representative or visit our website at...

Open the catalog to page 2

All DILAS catalogs and technical brochures

  1. Fiber Cables

    1 Pages