MPE-V01
1 / 6Pages

Digital Instruments Multi Purpose Equipment for Timing Application

Digital Instruments Multi Purpose Equipment for Timing Application The MPE-V01 consist of a mainboard in which is possible to plug up to 5 expansion cards, depending of your needs. It comes in two different version: 19'' chassis and ETSI compatible. EXP-IB-AM It is able to provide 4 isolated IRIG X AM outputs with BNC connectors. EXP-LPN expansion module able to provide 4 isolated (80 dB) 10 MHz low-noise outputs. The module include an OCXO which permits to maintain outputs active (in holdover) in case of failure of the mainboard OCXOs. Outputs have BNC connectors. Output level is 13 dBm...

Digital Instruments Multi Purpose Equipment for Timing Application ARM Cortex A9 @ 667 MHz Dual Core 512 MB DDR3 Linux 2.6 operative System 2x GbE Network Interface via RJ45 2x SFP 2.5 Gbps Support up to 500 clients per port for IEEE1588v2 · Support up to 10,000 NTP requests per second (per Ethernet port) · Single or dual integrated GNSS receiver · Single or dual internal High Stability OCXO (Rubidium as option) · IEEE1588v2 and SyncE compliant · Multi reference inputs · NTP Time Server · Modular architecture (5 slots that can be filled with several expansion cards) · Dual hot replaceable...

Digital Instruments Multi Purpose Equipment for Timing Application Block diagram MAIN BOARD

Digital Instruments Multi Purpose Equipment for Timing Application Mainboard MPE-V01 Local management: display, keypad and serial port on 19” subrack. N° of Interfaces: 2 electrical +1 optical, Interface type: 10/100/1000 (electrical) + GbE (optical) for: NTP Server, PTP/IEEE 1588 v2 Grandmaster clock, web interface and SNMP. Auxiliary Input: external frequency reference (10 MHz, 2.048 MHz, ...) N° of expansion slots: 5, Integrated GPS: (as option), Redundant Internal Power Bus, Local Oscillator: OCXO (Rubidium as option), Serial Interface: RS232 via DB9 connector, Power Supply: Dual...

Digital Instruments Multi Purpose Equipment for Timing Application EXP-IB-DC N° of outputs: 4, Connector type: BNC female, Signal type: IRIG X 023 (DC level shift), Level: TTL (5Vpp), Impedance: 50 Ω, Isolation: 80 dB. EXP-PPS N° of outputs: 4, Connector type: BNC female, Signal type: PPS Pulse Per Second, Level TTL (5Vpp), Impedance: 50 Ω, Isolation: 80 dB, Accuracy: <50 nsec. EXP-ETH N° of Interfaces: 2 electrical + 2 optical, Interface type: 10/100/1000 (electrical), GbE (optical), Connector Type: RJ45 + SFP, Supported protocols: NTP, SNTP, PTP (IEEE-1588v2), SyncE, HTTP, SYSLOG, SNMPv4,...