GPS-DS-10
1 / 4Pages

Catalog excerpts

Digital Instruments GPS-DS-10 Double Signal Generator with Exchange System

Digital Instruments GPS-DS-10 Double Signal Generator with Exchange System Overview GPS-DS-10 is a Time & Frequency multi-output Signal Generator (PPS and 10 MHz). It consist of two independent GPS receivers individually provided with high stability OCXO’s. The two hot-plug modules are in hot redundancy with hot swappable module generator. In the standard version there are 10 independent outputs at 10 MHz as well as 1PPS. Furthermore the unit has NTP capability via 10/100 Ethernet interface. GPS-DS-10 is extremely reliable as both generators module are completely autonomous, because...

Open the catalog to page 2

Digital Instruments GPS-DS-10 Double Signal Generator with Exchange System Features Switch Unit: · 10 independents BNC connectors at 10 MHz frequency, with 13 dBm each of power level. · 10 independents PPS connectors with TTL level terminated at 50 Ohm. · 7 dry contact for electrical signaling of switch unit. · 4 photo-coupled input for switch unit remotization. · Serial connection in RS232 Standard. · Standard network connection Ethernet 10/100 with TCP/IP protocol complete of descriptive MIB on SNMPv1 protocol. · Web server integrated for direct browser management. · Device's supply in...

Open the catalog to page 3

Digital Instruments GPS-DS-10 Double Signal Generator with Exchange System Tech. Spec. Frequency reference Signal: 10 MHz sine wave. Spectral purity: -70 dBc at full output power. (harmonics), -75 dBc at full output power (non-harmonics). Phase noise: -130 dBc at 1 kHz. Outputs: 10 independent. Output level: 13 dBm each output. Output impedance: 50 Ohm. Output connectors: BNC Stability: 1e-12 daily average OCXO locked at GPS in SA. OCXO Standard: 1e-10 daily average OCXO in free run, OCXO SC: 2e-11 daily average OCXO on free run. Time reference Signal: 1 PPS, 100 µs Duty, Rising Edge....

Open the catalog to page 4