Digital Instruments AMP-V01 AF Amplifier / Digital Delay

Digital Instruments AMP-V01 AF Amplifier / Digital Delay 1 AMP-V01 is a cluster for the analysis of audio for systolic professional applications. The high performance is obtained thanks to the implementation of the most advanced digital technologies, that allow the digital processing of audio signals. The chain of low-frequency signal is in fact directly processed by a multiple system of 32-bit DSP, allowing a customizable set of parametrization. Sub modem audio extractors sync signals, DTMF Decoder and anything else that could be transmitted simultaneously with a digital audio can be processed...

Digital Instruments AMP-V01 AF Amplifier / Digital Delay 2 Features · Analog audio output on balanced XLR connectors, · Digital audio AES-EBU. (Optional), · Dry contact for remote signaling system, · Front jack headphone listening, · Level Meter BF, · Modulation depth (Peak), · Modulation depth (Mean time set), · Density modulation (Optional), · Demodulation DTMF, · Serial port RS232 or RS485, · Remote management software developed in Windows environment, · Power system AC, DC, · AC 95Vac to 240 Vac 50/60 Hz, · DC 20 Vdc to 50 Vdc, · System in format 19'' Rack 1U.

Digital Instruments AMP-V01 AF Amplifier / Digital Delay 3 Tech. Spec. Audio section Bandwidth: 10 Hz – 16.000 Hz +/- 0.1 dB Output level: 0 dBm into 600 Ω for 400 Hz tone modulated 50% Amplification: From 0 dB to 9 dB 1.0 dB steps THD: <0.05% S/N: <84 dB Impedance: 600 Ω transformer balanced Connections Audio Output: XLR connector Output Head: JACK 6.3 Signaling Serial connection: RS-232 Connector DB9 Male ± 15 kV (ESD). Signaling: 4 dry contact over Weidmuller connector step 3.5 mm. Supply Network: 95 Vac – 240 Vac, Plug IEC320 integrated, filter EMI/RFI. Battery: 2 independent power suppliers....