SHDSL Bridge Router Michelangelo SHDSL.bis - Code 8E4458 l Bridge Router with SHDSL.bis technology l Point to Point Bridge applications l Built-in Stateful Packet Inspection Firewall DESCRIPTION Michelangelo SHDSL.bis is a Bridge/Router with SHDSL.bis technology for connections up to 5.7 Mbps (2 wires connection). The SHDSL.bis technology, so as the HDSL one, performs symmetric connections, that is the downstream and the upstream are the same. This is its main feature if compared with the ADSL technology that performs asymmetric connections (the upstream is lower than the downstream). These two xDSL technologies (symmetric and asymmetric) allow to choose the best solution for the application to be carried out or for the service to be offered. With the Michelangelo product line, Digicom satisfies any kind of application. The typical application of Michelangelo SHDSL.bis is the Point-to-Point Bridge that allows the connection of two LANs over the leased line. Michelangelo SHDSL.bis uses the traditional twisted pair (metallic continuity is needed). In case of campus applications (inside a private estate) it is not necessary to buy leased lines (CDA), but you can use proprietary lines. 2 wires Michelangelo SHDSL.bis Michelangelo SHDSL.bis BRIDGE LAN to POINT TO POINT LAN CONNECTION Michelangelo SHDSL.bis 16/03/2010 For further information visit our website http://www.digicom.it

Michelangelo SHDSL.bis is the ideal solution also for telecom operators that offer Internet connections with symmetric speed. The connection speed is automatically setup for the maximum performance also in critical connection conditions. (*) Michelangelo SHDSL.bis is interoperable with Michelangelo SHDSL (code 8E4338) in 2 wires connections up to 2Mbps. TECHNICAL FEATURES ROUTER SHDSL • ITU-T G.991.2 standard • Symmetric speed up to 5.7 Mbps • Autoadaptative connection speed • ATM Adaptation Layer Type 5 (AAL5) • Multiple Protocol over AAL5 (RFC 2648, formerly RFC 1483) • Bridged or router Ethernet...