Digi Remote Power Manager Power Control and Monitoring Device The Digi Remote Power Manager offers complete in- and out-of-band power management for servers, routers, switches, rewalls and other network equipment. Overview The Digi Remote Power Manager (Digi RPM) is an intelligent power distribution unit for remote power management. It transparently integrates with the Digi Passport® and Digi CM™ product families, enabling console and power management from a common web interface menu. The Digi RPM enables remote reboots and power on/off of connected devices from anywhere across the corporate LAN/ WAN. It measures the combined electrical load of attached devices and provides statistics on average/apparent power, RMS voltage/current, circuit breaker status, maximum current and monitors ambient temperature. The Digi RPM provides real-time alerts and alarms for system reboots, changes to power usage, out-of-spec temperature readings and more, allowing immediate, remote response to on-site conditions. Cascading allows up to ten Digi RPMs to be daisy-chained from a single RJ-45 serial port. The Digi RPM is available in eight-port 1U rack-mountable and ten-port Zero-U rackmountable versions, as well as 120VAC/20A and 240VAC/16A models (up to 10A per port). Application Highlight Digi RPM 8 Data Center Management Local Management PC RS-232 Ethernet Power Connections Analog LAN/WAN HP-UX Server Digi CM™ Cisco Router Analog Switch Firewall Serial Connections to Console Ports Management Laptop Features/Benets • • • Digi Passport Digi CM Congurable alarms provide continuous real-time monitoring Daisy-chain up to 10 Digi RPMs from a single RJ-45 serial port • ™ Monitor ambient temperature to prevent loss of critical equipment due to overheating • ® Front panel displays total current and power load • Related Products Remotely reboot or power devices on/off without onsite personnel Integration with Digi Passport or Digi CM provides common interface for console and power management over Ethernet or dial-up www.digi.com

Digi Remote Power Manager 8/10 Features Connections Command line interface for direct serial connection Power Sensor Average/apparent power, RMS voltage/current, Circuit breaker status, Max current Alarm LEDs High current alert Status LEDs Outlet status and alarm indication Serial Ports 2 RJ-45 (one for communication, one for daisy-chaining) Digi RPM 8: 17.13 in x 4.84 in x 1.73 in (43.50 cm x 12.30 cm x 4.40 cm) Digi RPM 10: 37.80 in x 2.36 in x 1.97 in (96.00 cm x 6.00 cm x 5.00 cm) Dimensions (L x W x D) Digi RPM 8: 3.2 lb (1.44 kg) Digi RPM 10: 3.75 lb (1.70 kg) Weight Power Power Outlet...