Specifications:
The document provides detailed specifications for hydraulic hoses, specifically the 1 SN type. Key parameters include internal and external diameters, reinforcement diameter, working and burst pressures, minimum bending radius, and weight per meter. The hoses are made with oil-resistant synthetic rubber tubes, reinforced with high tensile steel wire netting, and covered with synthetic rubber that is resistant to abrasion, ozone, and weather.

Technical Data:
- Temperature Range: -40°C to +100°C
- Standards: DIN EN 853; SAE 100 R1S

Hose Specifications Table:
The table lists various models of hoses with their respective specifications:
- Model 11-04: Internal Ø 6.4 mm, External Ø 13.4 mm, Working Pressure 225 bar, Burst Pressure 900 bar, Min. Bending Radius 100 mm, Weight 0.28 kg/m
- Model 11-05: Internal Ø 7.9 mm, External Ø 15.0 mm, Working Pressure 215 bar, Burst Pressure 850 bar, Min. Bending Radius 115 mm, Weight 0.32 kg/m
- Model 11-06: Internal Ø 9.5 mm, External Ø 17.4 mm, Working Pressure 180 bar, Burst Pressure 720 bar, Min. Bending Radius 130 mm, Weight 0.40 kg/m
- Model 11-08: Internal Ø 12.7 mm, External Ø 20.6 mm, Working Pressure 160 bar, Burst Pressure 640 bar, Min. Bending Radius 180 mm, Weight 0.50 kg/m
- Model 11-10: Internal Ø 15.9 mm, External Ø 23.7 mm, Working Pressure 130 bar, Burst Pressure 520 bar, Min. Bending Radius 200 mm, Weight 0.66 kg/m
- Model 11-12: Internal Ø 19.1 mm, External Ø 27.7 mm, Working Pressure 105 bar, Burst Pressure 420 bar, Min. Bending Radius 240 mm, Weight 0.73 kg/m
- Model 11-16: Internal Ø 25.4 mm, External Ø 35.6 mm, Working Pressure 88 bar, Burst Pressure 350 bar, Min. Bending Radius 300 mm, Weight 1.08 kg/m
- Model 11-20: Internal Ø 31.8 mm, External Ø 43.5 mm, Working Pressure 63 bar, Burst Pressure 250 bar, Min. Bending Radius 420 mm, Weight 1.35 kg/m
- Model 11-24: Internal Ø 38.1 mm, External Ø 50.6 mm, Working Pressure 50 bar, Burst Pressure 200 bar, Min. Bending Radius 500 mm, Weight 1.70 kg/m
- Model 11-32: Internal Ø 50.8 mm, External Ø 64.0 mm, Working Pressure 40 bar, Burst Pressure 160 bar, Min. Bending Radius 630 mm, Weight 2.20 kg/m

Contact Information:
For inquiries, contact Dietzel Hydraulik GmbH at Leedenstraße 10, 04626 Löbichau, Tel.: +49 (36602) 140-140, Email: [email protected].