Specifications:
The document provides detailed specifications for hydraulic hoses under the category '1 SC'. Each hose is identified by an order number and includes measurements such as internal and external diameters, reinforcement thickness, working and burst pressures, minimum bending radius, and weight per meter. The hoses are designed with oil-resistant synthetic rubber tubes, reinforced with high tensile steel wire netting, and covered with synthetic rubber that resists high temperatures, ozone, and abrasion. The temperature range for these hoses is from -40°C to +100°C, and they comply with the DIN EN 857 standard.

Key Data from Table:
- Order No. 19-04: Internal Ø 6.4 mm, External Ø 13.5 mm, Working Pressure 225 bar, Burst Pressure 900 bar, Min. Bending Radius 75 mm, Weight 0.18 kg/m.
- Order No. 19-05: Internal Ø 7.9 mm, External Ø 14.5 mm, Working Pressure 215 bar, Burst Pressure 860 bar, Min. Bending Radius 85 mm, Weight 0.21 kg/m.
- Order No. 19-06: Internal Ø 9.5 mm, External Ø 16.9 mm, Working Pressure 180 bar, Burst Pressure 720 bar, Min. Bending Radius 90 mm, Weight 0.28 kg/m.
- Order No. 19-08: Internal Ø 12.7 mm, External Ø 20.4 mm, Working Pressure 160 bar, Burst Pressure 640 bar, Min. Bending Radius 130 mm, Weight 0.33 kg/m.
- Order No. 19-10: Internal Ø 15.9 mm, External Ø 23.0 mm, Working Pressure 130 bar, Burst Pressure 520 bar, Min. Bending Radius 150 mm, Weight 0.41 kg/m.
- Order No. 19-12: Internal Ø 19.0 mm, External Ø 26.7 mm, Working Pressure 105 bar, Burst Pressure 420 bar, Min. Bending Radius 180 mm, Weight 0.52 kg/m.
- Order No. 19-16: Internal Ø 25.4 mm, External Ø 34.9 mm, Working Pressure 88 bar, Burst Pressure 352 bar, Min. Bending Radius 230 mm, Weight 0.78 kg/m.