Product Datasheet Gear Pump: Mini Series – 300ml/min – DC Motor Diener Precision Pumps is certied to medical standard ISO 9001 / ISO 13485. In addition, we have a clean-room according to ISO Class 7. All DPP pumps are customized to suit your requirements: the information below represents one of the possibilities. Features The Mini series is designed for applications requiring accurate ow in a very small package size. The wetted materials and gear construction are the same as those of it’s larger cousins, but by removing one of the shaft bearings the overall length is much shorter. In addition, the magnetic coupling has been miniaturized to further reduce the overall length without sacricing highpressure performance. The inlet and outlet port locations can be located on the side, top, or end of the pump, and are available in a variety of sizes. The brush-style DC motor is oversized and gives excellent brush life at a relatively low cost. Pump shown with 1/8”-NPT side ports. Benets • Magnetically Coupled: No seal leaks • Positive Displacement: Pulse-less ow delivery across pressure range • Inert Construction Materials: Compatible with wide range of uids • Mounting Versatility: Adjustable base bracket mounting with a variety of porting styles/locations • Extremely Efcient: Very low power consumption • Mounted to long-life brush-style motor Typical Performance Curve: Water at Room Temperature 300 Amperage (amps) Motor Control Voltage Amperage (amps) Flow: 12vdc Product Datasheet

Product Datasheet INLET PORT DIMENSIONAL OUTLINE DRAWING (mm) Specications Performance Max. continuous pressure: Max. intermittent pressure: Max. static Case pressure: Inlet: Speed range: Fluid viscosity range: Electrical Supply voltage: speed) Rotation: Max. current: 0 to 24vdc (vary voltage to vary motor Clockwise 1.6 amps Temperature Fluid temp. range: Ambient air temp. range: Relative humidity range: Construction Standard: – Optional: Inlet/Outlet: – Optional: Marking: 316L stainless steel, PEEK®, EPDM 304 SS, Alloy-C, PPS, Teon®, Silicone, Viton®, Kalrez® 1/8”-NPT (standard) 1/4-28 UNF,...