Product Datasheet Gear Pump: Optima Series – 1000ml/min – DC Motor Diener Precision Pumps is certified to medical standard ISO 9001 / ISO 13485. In addition, we have a clean-room according to ISO Class 7. All DPP pumps are customized to suit your requirements: the information below represents one of the possibilities. Features The Optima series is designed for applications requiring accurate flow in a very small package size. The wetted materials and gear construction are the same as those of it’s larger cousins, but by removing one of the shaft bearings the overall length is much shorter. In addition, the magnetic coupling has been miniaturized to further reduce the overall length without sacrificing highpressure performance. The inlet and outlet port locations can be located on the side, top, or end of the pump, and are available in a variety of sizes. The brushstyle DC motor is oversized and gives excellent brush life at a relatively low cost. Pump shown with 1/4-28 UNF side ports. Benefits • agnetically Coupled: No seal leaks M • ositive Displacement: Pulse-less flow delivery across P pressure range • nert Construction Materials: Compatible with wide range of fluids I • ounting Versatility: Adjustable base bracket mounting with a M variety of porting styles/locations • xtremely Efficient: Very low power consumption E • ounted to long-life brush-style motor M Typical Performance Curve: Water at Room Temperature 1600 Amperage (amps) Flow Rate (ml / min) Motor Control Voltage Amperage (amps)   Flow: 12vdc Product Datasheet

Product Datasheet DIMENSIONAL OUTLINE DRAWING (mm) Specifications Performance Max. continuous pressure: Max. intermittent pressure: Max. static Case pressure: Inlet: Speed range: Fluid viscosity range: Electrical Supply voltage: Rotation: Max. current: 0 to 24vdc (vary voltage to vary motor speed) Clockwise 1.6 amps Temperature Fluid temp. range: Ambient air temp. range: Relative humidity range: Construction Standard: – Optional: Inlet/Outlet: – Optional: Marking: Mass: 316L stainless steel, PEEK®, EPDM 304 SS, Alloy-C, PPS, Teflon®, Silicone, Viton®, Kalrez® 1/4-28 UNF (standard) 1/8”-NPT ,...