GEAR PUMP: OPTIMA1000 ML/MIN – BLDC MOTOR
2Pages

nDIENER Precision Pumps The Optima series is designed for applications requireing a very small package size. The construction is the same as those of it's larger cousins, but by removing one of the shaft bearings the overall length is much shorter. The inlet and outlet ports can be located on the side or end of the pump, and are available in a variety of sizes. The brush-less DC motor has an integral flange allowing bulkhead mounting, and its IP-55 rating ensures it will stand up to harsh environments. The Optima series - Engineering Your Flow > Food & Beverage > Bulk Fluid Transfer > Cooling > Medical / Industral Sample Fluid Delivery 3D Mounting: Our pumps are ex-tremly versatile when it comes to mounting. The body is compact in size and the flexible inlet and outlet port locations simplifying the plumbing and conserving valuable space. Chemically Resistant: Our pumps are made from materials that are resistant to a wide range of aggressive chemicals. This means our pumps can also operate reliably and precisely in even the most environments. Long Life: DPP pumps are all characterized by their robustness and performance. Wear and tear is at its lowest, and their smart designs ensure a sustainable reduction of operating costs. Low Pressure Pulsation: Thanks to their smart drives and the innovative helical gear design our pumps ensure an extremely smooth fluid delivery with almost no pressure pulsation. 100% Outgoing Test: Before any pump leaves our factory, it is stringently and extensively tested in accordance with its specifications. Our customers receive detailed reports, saving them time and money. No Shaft-Seals: DPP gear pumps are hermetically sealed instead of using conventional shaft seals.This means low maintenance for you and your customers, a long service life and the highest degree of productivity. Performance Max. continuous pressure: Max. intermittent pressure: Max. static Case pressure: Inlet: Speed range: Fluid viscosity range: Temperature Fluid temperature range: Ambient air temp. range: Relative humidity range: Thermal protection: -20 to +100°C 0-40°C 0-95% non-condensing Internal thermal Electrical Supply voltage: 24 vdc Tach. Output: 6V square wave, 4 pulses per revolution Rotation: Max. current: Current Overload Protection: 4-conductor Teflon cable: Color code: Motor rating: Clockwise 1.8 amps 1.8 amps 24 AWG Black=ground, Red=+24 vdc, Green=Tach. Output, White=0-5 vdc speed control IP-55 Construction Standard: Optional: Inlet/Outlet: Optional: Marking: Mass: 316L stainless steel, PEEK®, EPDM 303 SS, Alloy-C, PPS (gears), Teflon®, Silicone, Viton®, Kalrez® 1/4-28 UNF (standard) 1/8"-NPT, 1/4"-NPT, G1/8, G1/4, exiting the side or end of the pump Permanent laser-mark identification for 100% traceability 0.8 kg Performance values are limits and cannot all happen simultaneously. Please contact your sales engineer for further technical information and customized options. Engineering Your Flow Product Datasheet Contact E-Mail: switzerland@dpp.swiss usa@dpp.swiss china@dpp.swiss

Motor Control Voltage: Amperage (amps) Amps: 1vdc ----Amps: 3vdc Amps: 2vdc ----Amps: 4vdc DPP is certified to medical standard ISO 9001 / ISO 13485 and operates a clean-room according to ISO Class 7. All pumps are customized; the information given represent one of the possibilities. None of the information supplied by Diener Precision Pumps constitutes a warranty regarding product performance or use. Any information regarding performance or use is only offered as suggestion for investigation for use, based upon Diener Precision Pump's or other customer experience. DPP makes no warranties,...