- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
LFG500
LFG500
- Max. Output Power: 500W
- Max. Output Current: 1.3A
- Max. Output Voltage: 1200VAC
- Max. Power Consumption: 560W
- Mains Input: 210-230VAC, 50/60Hz
- Input Current: Max 2.6 Arms
- Efficiency: > 90% at nominal power
- Operation Temperature Range: +15 - +40°C
- Cooling: Max. 70 m³/h air flow rate, temperature controlled
- Weight: 5.6kg
- Current Mode: 0.1A - 1.3A
- Power Mode: 10W - 500W (via DSUB or PC connection only)
- Burst Mode: Pulse-Width 100µs - 100ms, Pulse-Delay 100µs - 100ms
- Load mismatch protection against open output and short circuit
- Turn off time at short cut/open load: < 1 sec
- Turn off time at adjustment error: < 5 sec
- DSUB25 (female) for remote operation by industrial system control units (24/10V voltage levels)
- Low pressure plasma generation
- Pin 1: GND
- Pin 2: External Set Value (if Pin 7 = high)
- Pin 3: Overheat
- Pin 4: Actual Value
- Pin 5: Device Active
- Pin 6: 24V AC, 50mA max
- Pin 7: Device Active
- Pin 8: External Clearance
- Pin 9: Set Value Output
- Pin 10 & 11: Control Options
- Pin 12 & 13: Burst Mode, Pulse Length (if Pin 7 = high)
- Pin 14: Load Error
- Pin 15: System Error
- Pin 16: Parallel Mode - Master
- Pin 17: Parallel Mode - Slave
- Pin 18-25: GND, Pin 25 = Remote Mode Active
Catalog excerpts
Diener electronic GmbH + Co. KG
Open the catalog to page 1
analog: 0...10V, 1/10mA(E/A), digital: low = 0...4V, high = 20...24V, 5/50mA(E/A) Diener electronic GmbH + Co. KG
Open the catalog to page 2
• Max. Output Power: 500W • Max. Output Current: 1,3A • Max. Output Voltage: 1200VAC • Max. power consumption: 560W • Input current: max 2,6 Arms • Efficiency: > 90% (at nominal power) • Power Adjustment modes: Current mode: 0,1A - 1,3A Power mode: 10W - 500W (via DSUB or PC connection only) Burst mode: - Pulse-Width: 100gs - 100ms - Pulse-Delay: 100gs - 100ms • Accuracy: better than ±5% of final value • Load missmatch protection agains open output and short circuit - turn off time at short cut/open load: < 1 sec - turn off time at adjustment error: < 5 sec • Synchronised parallel...
Open the catalog to page 3
analog: 0...10V, 1/10mA(E/A), digital: low = 0...4V, high = 20...24V, 5/10mA(E/A)
Open the catalog to page 4
Load error actual value Diener electronic GmbH + Co. KG Control option Pulse length Dead time
Open the catalog to page 5All Diener electronic GmbH & Co. KG catalogs and technical brochures
DLC3 Pages
RF 3002 Pages
RF 1002 Pages
Tetra 1506 Pages
Tetra 1006 Pages
Parylene P3002 Pages
Parylene P2602 Pages
Parylene P120D2 Pages
Parylene P302 Pages
Parylene P62 Pages
Parylene3 Pages
Surface treatment Service6 Pages
Atto/Zepto2 Pages
APC 5004 Pages
MWG12002 Pages
LFG50002 Pages
LFG30002 Pages
LFG10002 Pages
Plasma Surface Technology15 Pages
PlasmaBeamMini2 Pages
PlasmaBeamDuo6 Pages
PlasmaBeam PC6 Pages
Special systems36 Pages
TETRA 306 Pages
PlasmaBeam6 Pages
TETRA9 Pages
NANO2 Pages
PICO2 Pages
FEMTO2 Pages
Tetra 81 Page
PLASMA APC 5001 Page
- Ink
- Vacuum chamber
- Surface treatment machine
- Coating application system
- Plasma surface treatment machine
- Plasma generator
- Automatic surface treatment machine
- Laboratory surface treatment machine
- Surface treatment machine for the printing industry
- PC-controllable surface treatment machine
- Medical device surface treatment machine
- Portable surface treatment machine
- 3D part surface treatment machine
- Plate surface treatment machine
- Surface treatment machine for the eyewear sector
- Fabric surface treatment machine
- Desmear surface treatment machine
- Label printing surface treatment machine
- Vacuum surface treatment machine
- Atmospheric plasma generator