Multi Jet Flow Sensor M-TXKA/M-THXKA
2Pages

{{requestButtons}}

Catalog excerpts

Multi Jet Flow Sensor M-TXKA/M-THXKA - 1

DATASHEET MULTI JET FLOW SENSOR M-TXKA / M-THXKA COUPLING THREAD TYPICAL ERROR GRAPH FOR MODELS 413/414 When using the contact water meters as volume measuring components, we recommend that the meters are selected so that the head loss of 0.1 bar is not exceeded at maximum load! HEAD LOSS GRAPHS FOR MODELS 413/414 □ Model 414 with carbide bearing □ Overall and connection dimensions to DIN ISO 4064 □ DN 20 - 40 mm - with flange, PN 16 and PN 40 available □ Volume measuring component for measuring heat for billing hot water consumption □ Facility for remote transmission of flow rates Models 413 and 414 are multi-jet impeller meters designed to the latest technical standards with completely dry running operation and magnetic coupling. Only the impeller operates in the wet chamber to prevent faults due to sediment. The roller counter is dustproof and condensation-proof and can be rotated for easier reading. The built-in pulse transmitter is cast in a waterproof enclosure and is easily replaceable. The meters are equipped with a sealed shield for protection against magnetic interference. The pulse transmitter for volume measuring components is fitted with a 100 Q, 74 W protective resistor (cable length 3 m) The compact design in subassemblies simplifies maintenance HYDROMETER contact water meter models 413 and 414 can be supplied calibrated on request. The meter is tested for compliance with the figures specified in the calibration

Open the catalog to page 1
Multi Jet Flow Sensor M-TXKA/M-THXKA - 2

DATASHEET MULTI JET FLOW SENSOR M-TXKA / M-THXKA TECHNICAL DATA The M-T(H)XK Qn 6 (DN 32) is also available with G 11/. B meter thread to DIN ISO 4064. 'Manufacturer's note: Please read the note below the head loss graph before selecting suitable meter sizes. ORDER REFERENCES class indicated! Available pulse rates: Other versions and pulse rates Note - Please indicate separately when ordering: e.g. mechanical roller counters, order the pulse output without resistor type designations: □ HYDROMETER GmbH • Postfach 1462 • 91505 Ansbach/Germany □ Delivery address: IndustriestraBe 13 • 91522...

Open the catalog to page 2

All DIEHL Metering catalogs and technical brochures

  1. AERIUS

    2 Pages

  2. CORONA E

    9 Pages

  3. AQUILA V4

    3 Pages

  4. ALTAIR V4

    3 Pages

  5. WESAN ST 215

    3 Pages

  6. IZAR DOSING

    2 Pages

  7. IZAR PULSE H

    2 Pages

  8. ALTAIR V3

    3 Pages

  9. Wesan WB E

    5 Pages

  10. HYDRUS

    8 Pages

  11. WESAN WB 234

    3 Pages

  12. WESAN WS 233

    3 Pages

  13. Corona ER

    8 Pages

  14. WESAN HP 225

    3 Pages

  15. Altair

    3 Pages

  16. Wesan

    4 Pages

  17. corona

    9 Pages

  18. Ray Model

    12 Pages