*mydirectindustry

ICARUS

Product catalog summary

Overview

This document details the Dieci Icarus series of telescopic handlers, covering multiple models (35.13, 38.14, 40.14, 30.16, 40.16, 40.17). It includes comprehensive technical specifications, performance data, safety features, operator comfort elements, and optional accessories.

1. Specifications and Dimensions

Dimensions: Provided in millimeters, with variations based on optional wheel sizes.
Weight and Capacity: Maximum lifting capacities range from 3,000 kg to 4,000 kg depending on the model.
Lifting Height and Outreach: Maximum lifting heights vary from approximately 9.10 m to 16.90 m; horizontal outreach ranges from 9.10 m to 15.60 m.
Fork Swiveling Angle: Uniform 134° across all models.
Forces: Pull-out force around 5,700 daN; towing force approximately 7,300 daN.
Mobility: Maximum climb angle of 40%; empty weights between 10,700 kg and 12,100 kg; maximum speeds of 30 km/h standard, with optional 40 km/h.

2. Performance and Operational Parameters

Boom Operation: Times for lifting, descent, extension, retraction, and swiveling are specified in seconds (exact values partially detailed).
Steering and Axles: Two steering axles with planetary reduction gears; steering modes include 4-wheel, transversal, and 2-wheel steering. Front axle is rigid with optional leveling; rear axle oscillates.
Braking System: Oil bath service brakes on all wheels with double hydraulic circuits and servo assistance; negative action parking brake.

3. Engine and Transmission

Engine: 4-stroke diesel, direct mechanical injection, 4-cylinder vertical inline with turbocharger and aftercooler; liquid cooled.
Power: Iveco NEF engines rated at 74 kW (101 hp) and 93 kW (127 hp) at 2200 rpm.
Fuel Consumption: Approximately 230 g/kWh at 2200 rpm.
Transmission: Hydrostatic with variable displacement pump and automatic variation; electrical-hydraulic inversion; inching pedal for precise control; servo-controlled 2-speed gearbox.
Hydraulics: Gear pump with specified capacity and maximum operational pressure (exact values not fully detailed).

4. Safety Features

Standard electronic load limiter system to monitor and control fork or equipment load.
Anti-tipping device with movement block.
Independent hydraulic tipping outriggers.
Self-locking front axle differential with 45% limited slip.
ROPS-FOPS approved soundproof closed cab with heater.

5. Operator Comfort and Design

Largest door in the market for easy cab access.
Ergonomic cab with integrated armrest and joystick to reduce operator fatigue.
Optimized ventilation system with heating and air conditioning.
360° visibility from raised driver’s seat; internal anti-fall protection system.
Two independent rear-view mirrors to reduce blind spots.

6. Optional Accessories

Air conditioning, Webasto heater, water heater.
Digital speedometer, pneumatic suspension driver’s seat.
Boom head light, quick coupling for accessories.
Radio, anti-theft system, glass protection.
Additional customizations available via dealers.

7. Tires

Standard tires: 405/70x20” or 405/70x24” depending on model.
Optional larger diameter tires available.

8. Compliance and Standards

All models comply with EN 1459 standard.

Summary

The Dieci Icarus telescopic handlers combine high agility, power, and versatility with a reduced steering radius and multiple steering modes, enabling operation in challenging terrains such as muddy or mountainous areas. Safety is ensured through advanced electronic load control and mechanical safety devices. Operator comfort is enhanced by ergonomic cab design and excellent visibility. Efficient Iveco diesel engines paired with hydrostatic transmissions provide reliable performance and low fuel consumption. A broad range of optional accessories and customizations allow tailoring to specific operational requirements.

Catalog excerpts

360° Visibility Comfort From the significantly raised driver's sear, the innovative anti-fall protection system, located inside the cab, allows for a 360° view that is without comparison. Two independent rear-view mirrors on both sides reduce blind spots to a minimum. A telescopic lift that takes care of everything... You will notice it immediately, equipped with the largest door on the market, accessing the driver's seat will no longer be a problem. The inside of the cab has been entirely designed in order to make work easier for the operator. Thanks to the integration of the armrest in the right instrument panel, it both reduces arm stress and provides greater accessibility to the joystick. The precise distribution of the ventilation grills optimises efficiency of the heating and air conditioning system, providing a perfect distribution of air inside of the cab. 35.13 38.14 40.14 30.16 40.16 40.17 A/A* B C D E/E* F G H/H* I L M N O P 440/480* 440 / 480* 440 / 480* 440 / 480* 440 440 2000 2000 2000 2020 1660 1960 2900 2900 2900 2900 2950 2950 1030 1030 1030 1030 1330 1330 4430/4380* 4430 / 4380* 4430 / 4380* 4430 / 4380* 4870 4870 5900 5900 5900 5920 5940 6240 940 940 940 940 940 940 2460/2500* 2460 / 2500* 2460 / 2500* 2460 / 2490* 2490 2530 1910 1910 1910 1910 1920 1920 2310 2310 2310 2310 2340 2340 2480 2480 2480 3270 3270 3270 4760 4760 4760 4760 4700 4900 1440 1440 1440 1440 1700 1700 4130 4130 4130 4130 4400 4400 Icarus DIMENSIONS A* - E* - H* = Measurements referring to optional wheels Measurements expressed in millimetres G A / A* O P H/H* N Engine: low consumption, high yield Safety Designed for intense use, they guarantee a high level of reliability over time. The new TIER III engines guarantee remarkable elasticity providing maximum power, even at low engine speed and an unparalleled low operational noise level. This, along with the possibility of equipping the machine with a particle filter, provides for drastic reduction of consumption. For us, safety is an absolute priority, it is guaranteed by an electronic system, standard on all models, which makes it possible to always keep the weight on the forks or on equipment under control during work manoeuvres. The load limiter flexibly and accurately manages both standard equipment and that used for specific applications. Design Great agility and reduced steering radius Dieci has always considered design a significant aspect when engineering their own products. This philosophy is evident when considering the newly designed cab and chassis restyling. Paying particular attention, Dieci engineers have been able to interpret the request of a comfortable and functional compartment, creating a spacious and ergonomic cab with snappy styling. One of the characteristics that distinguish Dieci telescopic devices the most is workability. The extremely reduced steering radius combined with high capacity axles make the machine both agile and powerful. The four drive wheels and the possibility of steering the wheels in three different modes, make it possible to operate on any type of land. Muddy ground, mountain areas, tight spaces and many other extreme conditions will no longer be an obstacle. B C E/E* F D I L M 40.17 40.16 30.16 40.14 38.14 35.13 A* - E* - H* = Measurements referring to optional wheels

Open the catalog to page 1