Door Check Z
4Pages

Door Checks The Z door check is the best value model of all DICTATOR door dampers. Due to its small size it is particularly suitable for interior doors. The Z door damper is available in 3 different models: Z 1000, ZF and Z 1100. The ZF model is mainly used in France. Contrary to the Z 1000 and the ZF for hinged doors, the Z 1100 is designed for sliding doors. Usually the Z 1 100 for sliding doors is used only with a 20 N spring to keep the force needed for opening as low as possible. The Z door check is designed for vertical mounting. It can be used for right and left operating doors. The three different hooks available allow Z door dampers to be mounted onto overlapping, flush or recessed doors. By default the Z door checks are manufactured with nickel-plated or zinc-plated finish. There are not available colour coated or stainless steel models. Types of doors hinged doors: left and right operating, overlapping, flush, recessed Technical Data Closing force 20, 50 or 80 N (measured on the door damper) Damping characteristics progressive, adjustable closing speed Damping fluid silicone oil, almost independent of temperature Components included door damper, hook, screws Finish nickel-plated, zinc-plated © DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 NeusaB • Germany Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail info@dictator.de • 1036

Door Checks DICTATOR DICTATOR Z 1000 Door Check Cost-Effective Standard Model for All Interior Doors The DICTATOR Z 1000 door damper is mainly used on interior doors. It is the standard model of the Z range. Due to its universal fixing holes it also replaces the models ZF, ZU and ZT. The Z 1000 door check is available with different hooks for flush (1009), recessed (1011) and overlapping doors (1013) (see dimensioned drawing: maximum lintel projection 22 mm, maximum thickness of rebate 30 mm). Dimension X with - 1009 hook for flush doors X = 59 - 1013 hook for overlapping doors X = 78 -...

Door Checks DICATOR ZF Door Check Special Design for France The former DICTATOR ZF/ZU door dampers have completely been replaced by the Z 1000 door damper. The fixing holes on the Z 1000 have been completed accordingly. However the ZF door damper part no. 300147 is an exception. The dimensions of its casing and the operating lever differ from those of the Z 1000. It is especially designed for France and serves mainly for replacement. It is always supplied with the 1011 hook for recessed doors. ZF special design for France: part no. 300147 The mounting instructions for the Z 1000 also apply...

Door Checks DICTATOR Z 1100 Door Check For Room Sliding Doors The DICTATOR Z 1100 door damper is a special version of the Z 1000 with mounting bracket designed for room sliding doors. The Z 1100 door damper slows down the closing speed on the last few centimetres and closes the sliding door completely. Especially with lightweight room doors this represents the ideal solution as normal final dampers, due to their integrated return spring (see Damping Engineering of our catalogue), might re-open these doors a littlebit under unfavourable conditions. The Z 1100 door damper comes with the 1009...