Door Closer Solutions Contents Door Closer Solutions DICTATOR™ Door Checks Closing Springs Swing Door Hinges Special Door Closers (Tube door closer, DIREKT, floor spring WAB) Door Stops Back Checks Solutions for Sliding Doors (DICTAMAT 50, mechanical timer, release buffer) © DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1802 Subject to change without notice. Errors do not constitute claims for compensation for damages.

Door Closer Solutions © DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1802 Subject to change without notice. Errors do not constitute claims for compensation

Door Checks DICTATOR Door Checks Ensure Doors to Close Quietly. Doors can be incredibly noisy. Not only when people slam them, but also due to air pressure, gusts of wind and inadequate door closers. The more violent the movement, the louder the bang. With DICTATOR door checks no one will know the door was slammed! Doors that are slowed down and damped protect the environment as they take into consideration all those living and working within hearing reach of a closing door. Furthermore a door check protects the door, the hinges and the frame. The door check functions quietly and reliably. Every...

DICTATOR door checks are particularly suitable for heavy doors needing to close surely. They are usually mounted towards the centre of the upper door member enabling them to close firmly and open easily. If there is not enough room above the door to mount the hook, we recommend you fit a DICTATOR R 1400 on the closing face of the door. When the door is opened the hook automatically pushes the door check roller lever downwards thus tensioning the internal spring. Whenever the door is closed the roller lever enters the hook, controlling the door movement hydraulically during the last part of its...

Door Checks DICTATOR VS 2000 Door Check Top-of-the-Range Model The top-of-the-range DICTATOR door check is the VS 2000. It is also suitable for heavy doors. The VS 2000 is easy to install due to its patented fixing system with integrated hinged mounting plate. All fixing elements are hidden, so the hook and slimline body form an aesthetically pleasing unit. The VS 2000 door damper is usually mounted vertically in the centre of the door face. By default, the versions with 20 N, 35 N or 50 N, however, can also be mounted horizontally. The door damper VS 2000 is in particular for overlapping and...

Door Checks Upper edge of Türoberdoor kante Horizontal mounting The VS 2000 DICTATOR door damper is vertically fixed with its pivoting base plate, usually in the centre of the upper door leaf. The hook is at the correct height when the rubber roller on the bent lever only just touches the front edge of the hook when closing. Important: with overlapping doors the plastic plates must be used to compensate for a height difference between body and hook. For the horizontal mounting special mounting brackets or plates are available (see page 02.024.00). But you don't need a mounting plate/bracket if...

Door Checks DICTATOR V 1600 Door CheckFor Interior, Exterior and Fire Protection Doors The V 1600 is specified for interior and exterior doors. It has the same patented, hidden fixing system as the VS 2000 door check. Its cylinder is completely cased, too. The V 1600 door check is appropriate for the installation on recessed doors. For this kind of door it is furnished with a special hook (type 1011). In addition to the chromed or colour coated models, the door damper V 1600 is a va i la b le a lso in stain less steel. If sta i n less steel is required for optical reasons only, on demand there...

Door Checks V 1600 Door Check Mounting and Dimensions The V 1600 door damper is fixed by its mounting plate which afterwards cannot be seen any more. In case the door check is intended for a horizontal mounting position, the special models marked with the letter "H" (horizontal) in the article name have to be choosen. For the horizontal mounting a mounting plate with the part no. 205463 is available (for dimensions see page 02.024.00). If the V 1600 shall be mounted on an all-glass door, DICTATOR offers U profiles in stainless steel with the corresponding borings which are glued on the glass...

Door Checks Door Check for Fire and Smoke Protection Doors A special model of the V 1600 without adjustment and with strong spring has been tested for use on fire protection doors and has been issued test certificate no. P-120001480 by the German building authorities. But before mounting the V 1600F door check on a fire or smoke protection door, it has to be checked whether the door check is listed in the approval of the door or whether there exists a manufacturer's declaration which allows to mount the door damper on the respective door. The spezifications made there have to be observed exactly....

V 1600 / V 1600F Door Checks Part Numbers The following list shows the most current types. Of course it is always possible to supply the door checks - except the stainless steel types - with the 1011 and 1013 hook types. Various mounting plates are available for the installation on steel, glass and fire and smoke protection doors. For further information see page 02.021.00. Order Information (Further types on request) Note: ** available on request Model Hook type 1009 1011 1013 V 1600 door check 20 N, polished chrome 300464 ** 300967 V 1600 door check 20 N, satin...

Door Checks The R 1400 door damper is especially designed to cope with situations where unobtrusive mounting on the closing face of the door is wanted or required for optical or practical reasons. All R 1400 door checks are furnished with a special cylinder which allows vertical and horizontal mounting. Usually the R 1400 is mounted directly at the closing edge of the door. Therefore, mostly the 20 N spring is used to make sure the door can easily be opened. Normally the hook of the R 1400 is mounted to the frame from below or horizontally to its side. In case of flush aluminium or plastics frames,...