Single pilot check valve -block- line

Product catalog summary

Overview: This document provides technical specifications for single pilot check valves used in hydraulic systems. These valves are designed to block lines and are made with an aluminum body.

Specifications:

Material: Body made of Aluminum.
Cracking Pressure: Standard at 2.5 bar, with options for 5 bar and 10 bar upon request.

Product Variants:

FPSL 3/8:
- Connection: 3/8" BSP
- Max Flow: 25 l/min
- Max Pressure: 250 bar
- Pilot Ratio: 1:7
- Dimensions: ØN 6.5, A 75, B 60, D 35, F 45, G 14, H 29, I 14, L 40, M 18.5
FPSL 1/2:
- Connection: 1/2" BSP
- Max Flow: 45 l/min
- Max Pressure: 250 bar
- Pilot Ratio: 1:3.5
- Dimensions: ØN 8.5, A 95, B 70, D 35, F 55, G 21, H 38, I 19, L 40, M 15
FPSL 3/4:
- Connection: 3/4" BSP
- Max Flow: 85 l/min
- Max Pressure: 250 bar
- Pilot Ratio: 1:4
- Dimensions: ØN 10.5, A 135, B 90, D 50, F 80, G 30, H 57.5, I 22, L 50, M 14

Important Notes: The information provided is for informational purposes and may be subject to change without notice. DICSA disclaims responsibility for improper use of the product, except for manufacturing defects.

Catalog excerpts

i/i Material Body in Aluminium Cracking Pressure 2,5 bar (5bar and 10bar on request) The information gathered in this technical documentation (Catalogue) has an informative character and can be modified without previous notice. DICSA will not accept any type of responsibility resulting from an inappropriate use of the product, except the ones related to manufacturing defects. Printed on: 09/12/2023 at 09:29

Open the catalog to page 1

All Dicsa catalogs and technical brochures

Archived catalogs

SBR rubber sheeting width 1000_2019
1 Page
SBR rubber sheeting width 1000_2014
1 Page