PR100/PR300/PR500 Pressure Logger Operation
7Pages

Rev. 06/08 DICKSON PR100/PR300/PR500 Pressure Logger Operation Contents: Product Applications and Useful Features Product Specifications Operating Instructions / Getting Started DicksonWare Software Specifications Product Accessories Calibrations Troubleshooting & Battery Warranty / Factory Service & Returns Applications, Useful Features, & Specifications Troubleshooting & Battery DICKSON Warranty/ Factory Service & Returns Operating Instructions / Getting Started Software Specifications & Accessories Calibrations

Rev. 08/08 Product Specifications Pressure Range: PR100: 0 - 100 PSI , PR300: 0 - 300 PSI, PR500: 0 - 500 PSI Accuracy: ±1% of full scale Ambient Operating Conditions: +32 to +122¢ªF (0 to +50¢ªC) 0 to 100% RH IP Rating IP67 Units of Measure: PSI, Atm, Bar, milli Bar, in H2O, ft H2O, mm H2O, mm HG, in Hg, Pascal, Kilo Pascal Approvals: CE Battery Type: Lithium 3.6V (user-replaceable) Battery Life: 5 years typical at one minute sample intervals Fitting: 1/4” NPT Thread, 5/8” Hex Sample Point Storage: 7,936 points Sample Interval: User selectable from 10 seconds to 24 hours in 10 second...

Rev. 06/08 Applications, Useful Features, & Specifications DICKSON Getting Started Install the DicksonWare ™ Software. Unscrew the logger cover, connect the cable (supplied with the software) to the logger and to a working serial port on your computer. If the port is not COM2, refer to “No Communication ” in the Troubleshooting section below. NOTE: Download cable needs to be pressed firmly to make proper connection for downloading. Click the “Setup ” button and then press the “Clear” button. This will delete all data currently stored. The logger is now sampling and ready for use. The...

Rev. 06/08 Applications, Useful Features, & Specifications Warranty/ Factory Service & Returns DICKSON DicksonWare™ Software Specifications • Microsoft Windows® compatible • Allows for simple viewing and zooming of logged data • Easy set-up of Dickson Data Loggers including: • User selectable sample intervals from 10 seconds to 24 hours • Display temperature in °C or °F • Delayed logger start times • Logger data capacity can be set to wrap data or stop when full • Allow for real time monitoring and graphing. • Effortless exporting of data and graphs to other software • Data can be viewed in...

Rev. 06/08 Applications, Useful Features, & Specifications DICKSON Calibration Services - New Units N100 - NIST Traceable Calibration 1-Point: Includes documentation to one Dickson pre-selected point on new units only. N300 - NIST Traceable Calibration 3-Point: Includes documentation of three Dickson pre-selected points (a high, medium, and low) on new units only. N400 - Deluxe A2LA Accredited NIST Traceable Calibration 3-Point: ISO Guide 25/A2LA Documentation of 3 pre-selected points of as found data before and after calibration for Dickson temperature and/or humidity instrumentation on...

Rev. 06/08 Applications, Useful Features, & Specifications DICKSON Troubleshooting For troubleshooting information, click here for the technical support page. Battery The battery will operate the logger for 5 years at room temperatures. Operation of the logger at the temperature extremes, in real time mode for prolonged periods, or sample intervals of less than a minute, will significantly reduce battery life. The Battery Level Monitor on the Setup screen displays the battery voltage and a Low Battery Warning when replacement is needed. The battery is user replaceable and MUST be replaced...

Rev. 06/08 Applications, Useful Features, & Specifications DICKSON Warranty Dickson warrants that the products it sells will be free from defects in material and workmanship under normal use and service for a period of twelve months after delivery. In the event of a claim under this warranty, the product or part must be returned to the factory for repair or replacement (shipping pre-paid) with a Return Authorization Number (see Return Information above). It will be repaired at Dickson’s option without charge. This warranty DOES NOT cover routine calibration, pen, chart and battery...