ES120/ES120A Electronic Signal Data Logger
7Pages

Rev. 10/07 DICKSON ES120/ES120A Electronic Signal Data Logger Contents: Product Applications and Useful Features Product Specifications Operating Instructions / Getting Started Transmitter / Sensor DicksonWare Software Specifications Product Accessories Frequently Asked Questions Troubleshooting Warranty / Factory Service & Returns Applications, Features, & Specifications Operating Instructions / Getting Started Transmitter/ Sensor Software Specifications & Accessories FAQs & Troubleshooting Warranty/ Factory Service & Returns DICKSON ES120

Rev. 10/07 Applications, Features, & Specifications Operating Instructions / Getting Started Transmitter/ Sensor DICKSON Product Applications The Dickson ES120 sets a new standard in accurate, easy-to-use, affordable PC based recording. The ES120 will allow simultaneous monitoring of multiple variables with one data logger. With little effort, pressure, air movement, flow, fluid level, electrical properties, moisture, gas concentrations and much more can be monitored. Due to its small size and rugged design, the ES120 can be placed just about anywhere! The ES120 is ideal for researchers,...

Rev. 10/07 Applications, Features, & Specifications Operating Instructions / Getting Started Transmitter/ Sensor DICKSON Operating Instructions Install the DicksonWare™ Software. Connect the cable (supplied with the software) to the logger and to a working serial port on your computer. ES120 Setup Ensure dip switch settings. Remove the screw on the back of the case and position the switch for each channel according to the type of signal being supplied, ON for 0 to 20mA Current signal and OFF for 0 to 5Vdc signal. Connect your 0 to 5Vdc and/or 0 to 20mA transmitter(s) using the channel...

Rev. 10/07 Applications, Features, & Specifications Operating Instructions / Getting Started Transmitter/ Sensor DICKSON Transmitter / Sensor + - + - + - Power Supply Transmitter 1 Transmitter 2 ES120-A CH1 CH1 CH2 CH2 IN Voltage SIG OUT GND IN Voltage SIG OUT GND Typical Setup, Voltage (V) A powered transmitter is required to operate the ES120/ES120A.Any powered transmitter with a 4-20mA, 0-20mA, 0-5Vdc, 1-5Vdc or 0 to 15v (ES120A) output signal may be used. To connect a transmitter to the logger, locate the terminal block on the side of the logger. Connect the positive wire of the...

Rev. 10/07 Applications, Features, & Specifications Operating Instructions / Getting Started Transmitter/ Sensor DICKSON DicksonWare™ Software Specifications Microsoft Windows® compatible Allows for simple viewing and zooming of logged data Easy set-up of Dickson Data Loggers including: • User selectable sample intervals from 10 seconds to 24 hours • Display temperature in °C or °F • Delayed logger start times • Logger data capacity can be set to wrap data or stop when full • Allow for real time monitoring and graphing. • Effortless exporting of data and graphs to other software • Data can...

Rev. 10/07 Applications, Features, & Specifications Operating Instructions / Getting Started Transmitter/ Sensor DICKSON Frequently Asked Questions Sample Interval: The Sample Interval determines how frequently the data logger will save a reading. Using DicksonWare™ Software, the user can set a Sample Interval ranging from 10 seconds to 24 hours in 10 second increments. A temperature logger with data storage of 32,512 set at a 10 second Sample Interval will record for 3.75 days, while the same logger set at a 1 minute Sample Interval will record for 22.5 days. Data Storage: Data Storage is...

Rev. 10/07 Applications, Features, & Specifications Operating Instructions / Getting Started Transmitter/ Sensor DICKSON Warranty Dickson warrants that the products it sells will be free from defects in material and workmanship under normal use and service for a period of twelve months after delivery. In the event of a claim under this warranty, the product or part must be returned to the factory for repair or replacement (shipping pre-paid) with a Return Authorization Number (see Return Information above). It will be repaired at Dickson’s option without charge. This warranty DOES NOT cover...