Catalog excerpts
Mounting and disassembly tools Disassembly toolbox This toolbox from DICHTOMATIK is especially suited for the disassembly of O-Rings and U-Rings. This stable box contains a complete 8-piece set. The disassembly tools can be used for nearly any dimension. Disassembly tool Disassembly tool for shaft seal rings, U-Rings and end caps. The disassembly tools can be used for nearly any dimension. Mounting pliers A set of mounting pliers consists of four different plier sizes and a mounting bracket to attach as a clamping aid. They are suited to the mounting of U-Rings. The complete five-piece set is available in the box. The mounting pliers can be used with U-Rings with a diameter of up to 165 mm. Mounting pliers S: 22-30 mm Mounting pliers M: 30-50 mm Mounting pliers L: 50-70 mm Calibrating pliers The calibrating pliers are suited for use with PTFE seals. The calibrating pliers can be used in the 50 - 360 mm range. PTFE cutter With the PTFE cutter, PTFE guide bands can be cut to the desired length. Replacement blades for PTFE cutter (10 units). The cutting pliers cut guide bands to length at an angle of 45°. Additional deburring is not required due to the cleanly cut edge. The maximum allowable width of the PTFE guide bands is 25 mm. The information contained herein is considered to be reliable, but no assurances, warrants or guarantees whatsoever, of any kind, are provided with regard to their correctness or suitability for any purpose. The information reproduced herein is based on the current state of the technology and is not necessarily indicative of the performance of the end product. Complete testing and the performance of the end product are the user's responsibility. www.fst.com | dichtomatik.fst.com DICHTOMATIK FREUDENBERCINNOVATING TOGETHER
Open the catalog to page 1All DICHTOMATIK SAS catalogs and technical brochures
-
RADIAL SHAFT SEALS3 Pages
-
ROD SEALS3 Pages
-
PISTON SEALS2 Pages
-
O-RINGS2 Pages
-
O-RING TOLERANZES13 Pages
-
NON-METALLIC GASKETS2 Pages
-
DICHTOMATIK O-RINGS44 Pages
-
FOOD & BEVERAGE SEALS1 Pages
-
END CAPS2 Pages
-
DICHTOMATIK BRAND KIT OFFERINGS20 Pages
-
BACKUP RINGS1 Pages
-
AXIAL SEALS2 Pages
-
STANDARD ARTICLE OVERVIEW5 Pages
-
BONDED SEALS2 Pages
-
RADIAL SHAFT SEALS23 Pages
-
O-RINGS44 Pages
-
CAPABILITY STATEMENT12 Pages
