END CAPS End caps provide the secure closure of bores, bearings and shaft feedthroughs. End caps from the brand Dichtomatik consist of a metallic, partly encapsulated stiffening ring. The elastomer outer casing provides good static sealing. APPLICATIONS • Transmissions • Bearing block sealing • Split housings • Light metal housings • Sealing of thin flowing or gaseous media DIMENSIONS The currently available dimensions can be found on our website dichtomatik.fst.com or on our online ordering platform EASY. To minimize the rebound or oblique positioning of the end cap, the press-in device must be held for a certain period of time in the final position. The design of the mounting hole conforms to guidelines under DIN 3760 for radial shaft seal rings. The ISO tolerance zone H8 must be provided in accordance with DIN ISO 286 for the bore diameter d2. YOUR ADVANTAGES AT A GLANCE • Exclusive use of highly resistant NBR and FKM materials • Use across a wide range of temperatures • Secure closure of bores • Stiffening ring made of unalloyed steel in accordance with DIN EN 10139 • Three different design formats with an elastomer outer casing, as a half-shoulder design, or with an elastomer, grooved outer casing • Special profiles can be created INSTALLATION SPACE AND MOUNTING A properly executed mounting is the basic requirement for a functional seal. The use of a hydraulic or mechanical press-in device is the preferred way to press the end cap into the housing bore. It engages extensively on the exterior of the end cap, so the pressing force acts as tightly as possible on the outer diameter. FREUDENBERC INNOVATING TOGETHER

A circlip is needed at higher pressures. The information contained herein is considered to be reliable, but no assurances, warrants or guarantees whatsoever, of any kind, are provided with regard to their correctness or suitability for any purpose. The information reproduced herein is based on the current state of the technology and is not necessarily indicative of the performance of the end product. Complete testing and the performance of the end product are the user's responsibility. www.fst.com | dichtomatik.fst.com FREUDENBERC INNOVATING TOGETHE