R16 ROD SEAL
12Pages

Catalog excerpts

TECHNICAL DETAILS The Hallite R16 is a single-acting, o-ring energized, low-friction rod seal proven to be ideal in a variety of applications. The seal is made with our high-quality Armorlene® products combined with an elastomer energizer for superior performance. High performance Armorlene® materials, like HLX, provide outstanding wear and extrusionresistance properties as well as large range of temperature and media compatibility. Unlike other designs, the R16 can be used in tandem installations to provide optimum sealing in high-speed applications. The R16 is also commonly used as a pressure buffer seal protecting the primary rod seal from high-frequency pressure spikes that might be found in a system. This design also fits standard ISO 7425-2 grooves and is offered in a wide range of metric and inch options. • Long wear and high extrusion resistance F E A T U R E S • Design elminates occurrence of stick-slip • Able to absorb shock loads created from pressure spikes • Design offers excellent dynamic and static sealing properties Part Number Structure R16MR00500NHLX _ M UNIT OF MEASUREMENT M = Metric E = Inch Refer to Installation Recommendations and use designator for desired application Metric = mm X 10 Inch = inches X 1000 ENERGIZER MATERIAL PTFE MATERIAL SPECIAL FEATURE Refer to Energizer Table for desired energizer material Refer to Material Table for desired PTFE (face) material

Open the catalog to page 1

Maximum Dynamic Pressure** Used as Buffer Seal / Pressure Spikes Maximum Speed Temperature Range* *Dependent upon energizer used (NBR, FKM, etc.). **For pressures above 400 bar (5800 psi), contact Hallite Engineering. OPERATING CONDITIONS Data given are maximum values and can apply depending on specific application. Maximum ratings of temperature, pressure, or operating speeds are dependent on fluid medium, surface, gap value, and other variables such as dynamic or static service. Maximum values are not intended for use together at the same time, e.g. max temperature and max pressure....

Open the catalog to page 2

TEMPERATURE RANGE°C TEMPERATURE RANGE°F MAXIMUM DYNAMIC PRESSURE BAR MAXIMUM DYNAMIC PRESSURE - PSI ARMORLENE® HLX • Standard material for hydraulic applications • High compressive strength • Excellent extrusion resistance • Extended wear resistance Special Bronze Compound ARMORLENE® 713 • High compressive strength • Excellent extrusion resistance • Excellent wear properties ARMORLENE® HCF • Excellent in lubricating and non-lubricating hydraulic fluids (includes water) w/o zinc content • Not recommended for gas sealing applications • Not recommended for electrical conductive fluids Carbon...

Open the catalog to page 3

Applications with maximum radial clearance that are using nylon, phenolic, or PTFE bearings must ensure proper clearance in accordance with the bearing recommendations to avoid metal-to-metal contact. Please refer to Hallite Type 87, Type 506, and Type 533 Specification Sheets for this information. INSTALLATION RECOMMENDATIONS O-RING CROSS SECTION GROOVE SECTION Heavy Duty Application - H Light Duty Application - L DIAMETER RANGE Standard Duty Application - R GROOVE WIDTH GROOVE DIAMETER At pressure >400 bar use diameter tolerance f8/H8. *Radial Clearance G max. = maximum permissible gap...

Open the catalog to page 4

PART NUMBER RANGE (METRIC)* PART NUMBER metric PART NUMBER Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also...

Open the catalog to page 5

R16 PART NUMBER RANGE (METRIC)* PART NUMBER metric PART NUMBER Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits

Open the catalog to page 6

PART NUMBER RANGE (METRIC)* PART NUMBER metric PART NUMBER

Open the catalog to page 7

R16 PART NUMBER RANGE (METRIC)* PART NUMBER RANGE (INCH)* PART NUMBER inch PART NUMBER Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits Also Fits *Please contact Hallite for custom sizes, material selection, or seal design.

Open the catalog to page 8