*mydirectindustry

Catalogs
DIATEST
DIATRON2200

DIATRON2200

Product catalog summary

Overview: The document describes an electronic column with a 3-colour bar scale and digital display, designed for measuring and indicating various parameters. It features automatic interface detection and can be programmed via a rotary-push switch or software.

Specifications:

The column supports modules for 1, 2, 4, or 8 inductive probes or a radio receiver, with additional measuring systems available upon request.
Measuring modes include static, dynamic (min, max, average, position tolerance, bore measuring), and multi-plane (manual or automatic switching from 1 to 8 measuring points).
Range and resolution for inductive probes are ±3.0 mm/0.1µm to ±30 mm/1µm, with a 24-bit incremental measuring system.
Measurement units are available in mm and inch, with a 2-digit display for measuring point numbers and inputs, and a 6-digit display for relative and absolute measurements.
The bar scale range is from ±5.0000 mm to ±0.0050 mm, with automatic colour changes based on tolerance limits.

Mechanical Characteristics:

The housing is made of anodised aluminium with plastic top and bottom parts, and an acrylic glass front plate.
Dimensions are 56 x 418.5 x 86 mm, weighing approximately 1400 g including the foot plate.

Electrical Characteristics:

Power supply ranges from 100 to 240VAC, with a maximum power input of 2.5 VA without measuring modules.

Display:

Features a bar graph display with 103 + 2 LEDs, and a 6-digit and 2-digit LED display for various measurements and settings.

Connection:

Includes an RS232 interface with a 9-pin SUB-D plug, and two trigger/tolerance outputs for external contacts and control signal adaptors.

Measuring Data:

Resolution is 16-bit for analogue and 24-bit for incremental systems, with a measuring rate of 50 measurements per second.

DIAWIRELESS:

Receiver module for radio transmission of measured data, with an indoor operating distance of up to 20 metres.

Environmental Conditions:

Operating temperature ranges from 0 to 45°C, with storage temperatures from -20 to +60°C.
Front side protection is IP65, with electromagnetic compatibility according to EN50081-2 and EN50082-2 standards.

Contact Information:

DIATEST, H. Költgen GmbH, Schottener Weg 6, D-64289 Darmstadt, Germany. Tel: +49-6151-979-0, Fax: +49-6151-979-111, Email: [email protected], Website: www.diatest.com

Catalog excerpts

Measuring Column HBT probes and radio module

Open the catalog to page 1

Electronic column with 3-colour bar scale (red, yellow, green) and digital display. The column has an automatic function detecting the interface in use and informs the operator via the display. Programming of unit via the rotary-push switch on the front side or using software. The column can be equipped with modules for 1, 2, 4 or 8 inductive probes (HBT) or radio receiver. Connection of other measuring systems on request. Measuring and indicating functions Static measuring mode Dynamic mode: Min, Max, Average, position tolerance, bore measuring mode with automatic function Multi-plane measuring...

Open the catalog to page 2

DIATRON2200

DIATRON2200

Catalog excerpts

All DIATEST catalogs and technical brochures

Archived catalogs