Dial Indicator A dial gauge calibration fixture for use with a digital length measuring probe with a minimum range of 10 mm or or .000040" over that range. Inspects accuracy and hysteresis (re- versal error) in dial gauges. * Produces immediate digital read-out of actual spindle (plunger) travel. Cuts dial gauge inspection to small fraction( of usual time. Now check out dial gauges at shorter intervals duction tolerances and reduce scrap Attach printer to read-out unit for instant inspection certificates and elimination of transcription errors

The DIATEST dial gauge calibration fixture satisfies an increasing demand by quality control and produc- tion engineers for ways to inspect dial gauges faster and in greater frequency. Knowledge of the size and position of dial gauge errors permits gauging tole- rances to be narrowed which, in turn, allows greater utilization of job production tolerances resulting in an increase in "pass" volune. The easily portable, sturdy stand (3) has been especially designed to be used either in a vertical or in a horizontal inspection position. The body portion can be moved up or down within the fixture...

Dial Indicator Tester The MPG-30 was developed for dial indicators with large travel. Combined with optional reducer collets, dial indicators can be checked to a travel of 80 mm. An additional unit enables checking of lever indicators. The following values can be checked according to latest DIN-standard 878: Deviation in partial indicating range ft Total deviation fges Measured value of hysteresis fu General information For read-out systems, incremental probes with display unit are normally used. Particularly suitabled is unit IKF30 with AE1 I from DIATEST or MT25 with ND200 from Heidenhain....