Catalogs >
Diamond Systems >
Opal-MM-1616-XT

Opal-MM-1616-XT
2Pages

Catalog excerpts

Opal-MM-1616-XT™ Rugged Optoisolated PC/104™ I/O Module With 16 Unidirectional Inputs and 16 Relay Outputs Key Features ♦♦16 unidirectional optoisolated inputs with current limiting resistors - 30VDC input capacity - Programmable edge detection with interrupts ♦♦16 Form C SPDT relay outputs - 2A current capacity - 30VDC/30W switching capacity ♦♦+5VDC input ♦♦PC/104 form factor module ♦♦Low-noise design ♦♦Extremely rugged -40°C to +85°C operating temperature ♦♦Universal Driver software included Highly Advanced Optoisolated Inputs Opal-MM-1616-XT offers 16 unidirectional optoisolated inputs that can accept DC voltages up to 30VDC. Inputs feature channel-to-channel and input-to-output isolation of 500V DC or AC. A programmable edge detection circuit can generate interrupts on any change of an input. Reliable Relay Outputs OPMM-1616-XT features 16 Form C SPDT relay outputs with 30VDC at 2A capacity (30W maximum). Each relay is highly reliable with a long lifetime of 10M operations. Rugged Design Extended temperature operation of -40°C to +85°C is tested and guaranteed. The OPMM-1616-XT also uses ceramic capacitors for durability in high altitudes or other harsh environments. Optional 0-ohm resistors may be requested instead of the address jumpers for additional ruggedness, and optional latching connectors may be used for both inputs and outputs to further improve reliability. Shortened Development Time Diamond’s advanced Universal Driver software is included at no charge. It provides a programming library to simplify control of the board’s features and enable you to develop your application software quickly. www.diamondsystems.com | Diamond Systems Corporation | Mountain V

Open the catalog to page 1

OPMM-1616-XT: Opto Input and Relay Output PC/104 Module SPECIFICATIONS Product Overview INPUTS Number of inputs 16 unidirectional optoisolated inputs Input capacity 30VDC with current limiting resistors Logic levels Programmable edge detection with interrupts OUTPUTS Number of outputs Relay contacts SPDT (Form C) contacts Current capacity Switching capacity Contact resistance Actuation time Operate: 5ms maximum Release: 5ms maximum Relay lifetime MISCELLANEOUS Input voltage Current consumption 70mA typical, additional 28mA per activated relay Form factor Operating temperature -40oC to +85oC...

Open the catalog to page 2