Diamond PS+ connector systems are designed for high power applications up to 16 Watts optical power for SM fibers. Diamond Power Solution (PS+) connectors are based on proprietary ferrules terminated with Graded Index Fibers (GIF). GIF expands the beam with a magnification factor of 2.5 to 4.5 performing like a compact GRIN lens. Compared to ball lenses, GIF terminated connector ferrules offer the advantage of superior optical performance in terms of Insertion Loss (IL) and Return Loss (RL). Until now, a high-power ferrule with approximately 25 |jm Single mode (SM) expanded beam diameter is used in the DIAMOND PS standard connectors allowing up to 6W long life connectivity. By introducing new manufacturing techniques, we are now able to provide an improved PS+ design offering around 36 qm SM expanded Mode Field Diameter (MFD). This would allow the capability of high-power transmission of up to 16 W within SM optical connectors. This technology is applicable to most connectors interfaces, but due to safety issues Diamond suggests to use it on E-2000® connector with integrated metal protection caps and shutters. All of the features, users have come to expect from the E-2000®, Mini AVIM® and DMI, are available on the PS+ version. Please be aware that there is no intercompatibility between PS and PS+. For more information about the technical specifications, please refer to the PS Optical Interfaces datasheet available on Diamond website. FEATURES AND BENEFITS 17x reduced power density Low Insertion loss Ultra high polish for High return loss E-2000® with integrated metal protection caps and Shutters E-2000® with interchangeable colour- and mechanical-coded frames and thumb-latches. DMI: Minimal space requirement, PC board mount capability and excellent vibration resistance Mini AVIM®: titanium construction, lightweight, compact and embeddable STANDARDS Passed long term test at 16W, 2000h on E-2000® PS+ connector Passed Performance qualification according to IEC 61753-2-1, cat. U Passed Reliability qualification according to IEC 62005-9-2, cat. U Passed Long term Damp Heat according to Telcordia GR-032685°C/ AVAILABLE AS Terminated connector: (E-2000®, Mini AVIM® & DMI) simplex, and E-2000® Backplane 2-6 channels Terminated tubing: available with just 1mm PEEK tubing or additional 2.9mm SS metal jacket * Measured with high precision reflectometer ** May be further limited by cable specifications ***Specified by similarity DIAMOND SA | Via dei Patrizi 5 | CH-6616 Losone - Switzerland Tel. +41 58 307 45 45 | e-mail [email protected] www.diamond-fo.com (Power Solution) E-2000' PS+, DMI PS+, Mini AVIM® PS+ SINGLE MODE PC "0 DIAMOND the fiber meeting Specifications subject to change without notice BDD 1951968 06_23

CONNECTOR TYPES AND DIMENSIONS E-2000® PS+ connectors on 1mm PEEK tubing or 2.9mm metal jacket, 900um - 3mm boot style Ferrule material: External parts PC 0°: Zirconia/metal insert Plastic (red body and thumb-latch; blue boot) Available types: NOTE For color or mechanical keying thumb-latches, please refer to the E-2000® standard datasheet 6.7 Ferrule material: External parts: DMI PS+ - PC 0° Zirconia/metal insert Metal Available types: DMI PS+ connectors on 1mm PEEK tubing, without boot Mounting tool and instructions: For further information about mounting instructions, please refer to the DMI...

ADAPTER TYPES AND DIMENSIONS E-2000® PS mating adapter Available types: E-2000® External parts PC 0°: Plastic (red body and blue frames) Mating sleeve: Zirconia NOTE For complete product descriptions, please refer to the part-specific E-2000® Simplex datasheet. DMI PS mating adapters External parts: Metal Mating sleeve: Zirconia DMI mating adapters clip External parts: Metal (Cu Be2; tinned solderable) Mini AVIM® mating adapters Available types: Square flange adapter for wall mount Material: According to part list in datasheet “AVIM Family" on page 16

SAFETY INFORMATION FOR POWER SOLUTION CONNECTORS The Power Solution (PS and PS+) connector utilizes expanded beam technology to reduce the density of the optical power at the interface of the connection. This insures that the connector is less sensitive to contamination and maximum power can be transmitted to the connector without damage. CLEANING Cleanliness is a high priority when dealing with high power applications. As such, the basic concept when using PS and PS+ connectors is as follows: - Before each mating procedure, the connectors must be absolutely clean and inspected with a microscope....