Catalog excerpts
INDUSTRIAL FIBER OPTIC INTERCONNECT SOLUTIONS
Open the catalog to page 1PHOTONICS Fiber Optics are being used increasingly in commercial applications because of it’s bandwidth capacity, enviromental durability, and it’s ability to be deployed in numerous applications and markets. The light transmitted by fiber optics can be used as a power source, a digital signal transfer, or for analog analysis in sensing and measurement applications. In the past optical fibers were used primarily in the data and telecom industries, but new research has resulted in many new applications for fiber optic components. These applications cover markets such as: bio-medical,...
Open the catalog to page 2DIAMOND TECHNOLOGIES FOR FIBER OPTICS 0.1dB Grade - SM Ultra Low Loss The 0.1dB Grade is Diamond’s proposal for a Grade A definition for IEC quality grade standards. At this time Composite ferrule there is no formal definition for the Grade A in IEC standards, nevertheless, Diamond is promoting this qual- Diamond technologies are all based on a composite ferrule. ity grade under the 0.1dB Grade name. Instead of a full ceramic ferrule, Diamond has opted for a composite ferrule formed of a zirconia ceramic sleeve and a titanium metal insert. 0.1 dB Grade Optical Interface Custom drill sizes...
Open the catalog to page 3INTERFACES AND STANDARDS I PHOTONICS 5 OPTICAL AND CONNECTOR INTERFACES As a global company Diamond standardizes it's products according to existing IEC standards. Each termination is composed of an optical interface and a connector interface. The following section lists the applicable standards for Diamond's products. For complete information please refer to our website catalog. Connector Interfaces - IEC 61754 This standard is a collection of physical features on a connector assembly that defines a specified style. It consists of those minimum features that are functionally critical...
Open the catalog to page 4Depending on the application, different optical performances are required. In order to meet these requirePolarization plays an important role in the industrial photonics market. Sensors and communication systems ments, the PM product family is divided into two classifications. First, the PM+ with the highest PER values have been designed using Polarization Maintaining or Polarizing fibers. DIAMOND supplies high-quality solu- and the best mechanical properties. Second, the PM standard class with very good optical values and a wide tions to Polarization Maintaining (PM) and Polarizing (PZ)...
Open the catalog to page 5POWER SOLUTION EXPANDED BEAM TECHNOLOGIES Diamond uses different methods for expanded beam alignment, depending on the final use of the assembly. In this section, we will present the technologies using a GRIN lens spliced at the end of a fiber to realize a collimated beam dedicated to a connection. Other Expanded Beam technologies exist for non-contact connection and input/output application. PM-PS (Power Solution collimated for PM fibers) Polarization Maintaining (PM) fibers using the Power Solution (PS) optical interface benefit from the same Expanded Beam GRIN lens benefits. This more...
Open the catalog to page 6SPECIAL INTERFACE PRODUCTS V-FT – VACUUM FEEDTHROUGH Feedthroughs have been produced by Diamond for twenty years using a proven epoxy sealing technology. Applications with fibers are not only based on physical contact, but also other types of interfaces. Light must Diamond has standardized this sealing process and is now offering an off-the-shelf solution for the be injected in fibers and must get out to illuminate a target too. In some cases, feedthrough to go through Vacuum Feedthroughs. dissimilar ambient are necessary. The following products corresponds to the standardized solutions...
Open the catalog to page 7LABORATORY The test and calibration laboratory at DIAMOND SA has been accredited by the Swiss Accreditation Service SAS since March 2002. We are accredited as testing laboratory STS 333 for fiber optic components and as calibration laboratory SCS 101 for fiber optic measurement instruments in accordance with the standard ISO / IEC 17025:2005. The accredited test and calibration laboratory STS 333 / SCS 101 performs measurements, tests and calibrations not only for DIAMOND SA, subsidiaries and DIAMOND representatives all over the world but also directly for external customers. ISO 7...
Open the catalog to page 8V 12/18 the fiber meeting Headquarters DIAMOND SA via del Patrizl 5 CH-6616 Losone TI Tel. +41 58 307 45 45 info@diamond-fo.com
Open the catalog to page 9All DIAMOND SA catalogs and technical brochures
-
Fan-Out
2 Pages
-
FITEL® S179 Fusion Splicer
4 Pages
-
PS+
4 Pages
-
Expanded Beam Interconnects
2 Pages
-
DiaFlex
2 Pages
-
X-BEAM Std. & Fusion
2 Pages
-
DiaFlex
5 Pages
-
revos E-2000
2 Pages
-
F- 3000™ ODVA
3 Pages
-
OD3
3 Pages
-
MPO & Fan-Out cords
4 Pages
-
F-3000™ Family
21 Pages
-
MU Simplex & Duplex
2 Pages
-
ADT-UNI
2 Pages
-
FTTH / Inhouse
9 Pages
-
DiaFlex System
9 Pages
-
DIAMOND SA
13 Pages
-
Flyer We're Well Connected
2 Pages
-
Brochure Photonics
9 Pages
-
Brochure HE
9 Pages
-
Brochure Medical
16 Pages
-
Brochure FTTx
9 Pages
-
Flyer HE-2000™
2 Pages
-
Flyer DiaFlex
2 Pages
-
Flyer DiaDesk
2 Pages
-
Brochure Laser
9 Pages
-
Flyer Optelcon HE-2000™
2 Pages
-
Brochure Harsh Environment
9 Pages
-
Company Profile
20 Pages
Archived catalogs
-
Brochure Network Infrastructures
16 Pages