FIELD EQUIPMENT CLEANING & INSPECTION Multiple Fiber System (MFS) A very compact connector developed by Diamond based on MT ferrule technology. Available in 4-, 8- and 12-channels, as simplex or backplane (up to 48-channels), MM/SM, PC/APC. Multiple Fiber Push-On (MPO) A multifiber connector that complies with worldwide standards based on the MT ferrule. Available in 4-, 8-and 12-channels, as simplex, MM/SM, PC/APC. Fan-Out Efficient cable installation by means of pre-assembled cables and connectors. Characterized by excellent mechanical and thermal properties. Available in different lengths and connector types. Power Solution Multimode (PSm) Designed to handle all optical fibers in higher power applications. The optical interface can transmit 100W optical power on a 105um core. Available with E-2000™ and Micro AVIM™ connectors. F-SMA Power Solution Injection (PSi) mode stripper Removes unwanted cladding modes from the fiber and is used when emphasis is made on the preservation of the beam parameter product (small spot diameter and low numerical aperture). Available with the F-SMA connector for MM fibers from 100pm to 1000pm. F-SMA Power Solution Injection (PSi) mode guider Allows all modes, including cladding modes, to be transmitted with minimum attenuation, resulting in less heat and more power available at the cable output. Available with the F-SMA connector for MM fibers from 100pm to 1000pm. Optical Transmission Adapters (UGT) and Sacrificial Interfaces (SI) UGT are in-line adapters for PC to APC or reverse transition. SI are in-line components used to protect front panel connectors from damage due to repeated matings. Terminators High attenuation of return loss. Used for open output signals. In-line attenuators Used to adapt the transmitted light power to the characteristics of the receiver. Optical Gold Reflectors (OGR) Used as a fiber termination with the highest possible reflection. Hybrid Mating Adapters Used for connection of different types of connectors. Vacuum Feedthrough Obtained feedthrough benefits from a very low leak rate. It can be ordered for many types of fiber, including SM, MM, PM, PS, large core MM or others. Multichannel systems are also available. Interface Module (IMOD) The IMOD is a half adapter used for free space applications of optical connectors. Available in different accuracy variants. Laser and LED transmitter modules (MAT) / photodiode receiver modules (MAR) They are transceiver modules with an E-2000™ interface. Both types are designed to minimize light coupling losses and provide high optical stability in a wide variety of environmental conditions. ZEUS D50 HE The Fusion Splice Kit is designed to assemble or repair fiber optic connections in the field. The kit contains everything needed to prepare, handle and splice fibers and robust outdoor/military and industrial cables and connectors. Splice-on connectors (SOC) Fast, easy and reliable field installation of factory-quality terminations. Available connectors: E-2000™, F-3000™, SC, ST™ and FC. Splice Repair Kit Innovative fiber/cable repair option requires minimal strip lengths and no bulky splice sleeves. Cleaning Kit The kit contains a hand microscope for connector end-face inspection and all necessary tools for cleaning, including in-adapter cleaners. Video Microscope Kit The kit contains all necessary tools for inspection and cleaning of a connector end-face. The new Video inspection Microscope OLP-82P with 3.5-inch display and a built-in power-meter meets today's requirements for safety, reliability and quality. The P5000i digital inspection probe allows mated connectors to be inspected. The probe may be connected to a laptop. A variety of inspection tips and adapters are available for both kits. Inspection Adapter A variety of inspection tips and adapters are available for the video and handheld microscope to inspect all Diamond connectors. Reference patch cord In order to limit the variability of attenuation measurement using reference connectors, Diamond uses selected single mode fiber with restricted tolerances on the mode field diameter (MFD) as specified within the IEC 61755-2-4/ -2-5 standard. Available connectors: E-2000™, F-3000™, SC, FC. Launch fiber box Suitable for characterization of fiber optic networks using an optical time domain reflectometer (OTDR) measurement device. Available with standard telecom connectors or harsh environment revos E-2000™ and HE-2000™ connectors. Optical Attenuating Fiber (OAF) The OAF-Patch is a product family of wavelength independent fixed attenuation patchcords suitable for each connector type. Offering a large choice of nominal attenuation from 2dB to 30 dB on fiber type 9/125 pm. Training Diamond has more than 30 years experience in Fiber Optics. We offer several different training courses, both standard and customized meet your needs. Test and Calibration Lab Accredited by the Swiss Accreditation Service SAS as testing laboratory for fibre optic components and as calibration laboratory for fibre optic measurement instruments in accordance with the standard ISO/IEC 17025:2005. Cleanroom ISO 7 clean room (class 10,000 according to FED STD 209E) to supply products, such as pigtails, patch cords, adapters and mechanical parts that have to be packed in a controlled environment. MULTI FIBER CONNECTORS SERVICES, NETWORK & FIELD PRODUCTS CUSTOMIZED SOLUTIONS Many applications require complex, customized solutions. The highly qualified research and development team at Diamond will partner with you to develop the best mechanical and optical solution for your specific project. The technical team has in-depth experience in many different technologies. Diamond offers many years of experience in designing, manufacturing and testing high quality fiber optic components. DIAMOND SA via dei Patrizi 5 CH-6616 Losone TI Tel. +41 58 307 45 45 [email protected] www.diamond-fo.com Diamond SA is headquartered in Losone TI, Switzerland. Our operation is focused on the manufacture and assembly of high performance fiber optic interconnect solutions. Diamond's production facility employs state-of-the art methods and techniques, enabling connector termination of singlemode, multimode and polarization maintaining assemblies, using a variety of fibers.