DIAMOND Fiber Optic Components SINGLE MODE PC/APC MULTIMODE PC CABLE ASSEMBLIES AND ADAPTERS The special feature of the new DiaFlex fan-out connection is that the fiber whips can be removed and replaced via a connector system in the divider. This provides greater flexibility in the installation of fiber-optic networks. Cable ends can be replaced flexibly, quickly and without spending a great deal of time or money, and cable installations can be extended as is necessary. Thanks to the feed-in cap, which has a small design, preassembled cables can be inserted directly into pipes or cable ducts. There is therefore no need for expensive splices. The cable and the fiber whips are manufactured in the fiber design and quantity that you requested, inspected and delivered with the corresponding test reports. The DiaFlex contains a DIAMOND multi-fiber connector (MFS) for 8, 12 fibers (24 upon request). We recommend this product if... ... flexibility is required, e.g. in temporary installations ... connections have to be upgraded or retrofitted ... you do not want to use expensive splices DiaFlex with fiber whips FEATURES  Replaceable fiber whips  Protective cap with feed-in eye  IP class: IP68  Simple to use on site and no expensive splicing work necessary  Robust metal fiber divider  Can be used flexibly thanks to the small external diameter  Client-specific connector types and cable lengths DiaFlex connector system (male and female) TECHNICAL SPECIFICATIONS MFC connector: - in accordance with EN 186310 and the TIA/EIA 604-15 standard Divider connector material: - Blue-anodized aluminium Dim. DiaFlex 8/12/ 24 - Max. external diameter of the feed-in cap: 25 mm - Max. external diameter on the fiber whip side: 27 mm Fiber whip length: - From 0.5 m to 3 m (other lengths available on request) Labelling code: - Swisscom/ DIN/ IEC/ TIA standard Fiber whip protection: - Optional cable protection Fiber types available: - MM 50 µm or MM 62.5 µm, SM 9 µm DiaFlex with protective and feed-in cap SPECIFICATIONS (only DiaFlex connection) MULTIMODE 0° PC Insertion Loss (IL) TEST CONDITIONS Service life Operating temperature Storage temperature Cable retention (Multi fiber cable side) DiaFlex as a pre-assembled solution IEC 61300-2-4 * Measured with high precision reflectometer ** May be further limited by cable specifications NOTE Whips tested at an operating temperature of -10° / + 60° DIAMOND SA • Via dei Patrizi 5 • CH-6616 Losone - Switzerland Tel. +41 91 785 45 45 • Fax +41 91 785 45 00 • e-mail [email protected] the fiber meeting Specifications subject to change wi

CABLE SPECIFICATIONS CABLE * May be further limited by cable specifications ** Refers only to the cable. The tensile strength of the DaiFlex connector is always min. 700N *** Cable versions break-out, Kevlar reinforced and highly flexible DiaFlex female 24 channels with whips DiaFlex female 12 channels with whips DiaFlex female with cable gland DiaFlex female with cable boot DiaFlex connec tion

POSSIBLE CONFIGURATIONSAssembled DiaFlex - Fan-Out patchcord DiaFlex female DiaFlex male Fan-Out Assembled DiaFlex - DiaFlex patchcord DiaFlex female DiaFlex male DiaFlex male DiaFlex female (Fan-Out) (Fan-Out) Assembled DiaFlex - DiaFlex pigtail DiaFlex female DiaFlex male

DIALINK SINGLE PARTS A: DiaFlex female (Fan-Out) C: DiaFlex male – DiaFlex male D: DiaFlex male – Fan-Out E: DiaFlex female – Fan-Out F: DiaFlex female – DiaFlex ma