power pak TM

Product catalog summary

Overview: The document is a technical data sheet for the Diagnosys powerpak, a programmable modular power supply designed for use with the PinPoint range of test systems. It highlights the powerpak's capabilities, specifications, and integration features.

Specifications: Each powerpak module provides a programmable 20V at 32A floating power rail, with a peak output current of 40A. The output power is up to 240W, and the output isolation to earth is 200V. The powerpak supports series and parallel operations, with load and line regulation specified at 0.01%+5mV. Ripple and noise are limited to 50mV Vrms, and the response time is 50ms.

Modular Expansion: The base unit includes a single power rail, with the possibility of adding up to five additional modules, allowing for a total of six separately programmable power rails. Connections include + / - power and + / - sense for remote voltage sensing.

Programming and Integration: The powerpak is programmed via a USB 2.0 port and integrates with TestVue software. It can also be used with other test systems through supplied driver software.

Safety and Compliance: Users must ensure safe application of voltages within the Low Voltage Directive 2006/95/EC. The system includes global inhibit input, overcurrent output, and power-on indication features.

Environmental and Electrical Characteristics: The operating temperature range is 0 to 50°C, with humidity levels between 30% and 90% RH. Input voltage ranges from 90 to 275 Vrms, with a power factor of 0.9 and earth leakage current of 0.25mA.

Catalog excerpts

powerpak Interface circuitry External interface - 9 way D socket From powerpak circuitry Modular power supply Global Inhibit From powerpak circuitry From powerpak circuitry Output capability powerpak Output Capability 50 Output… Peak… Output Voltage (V) Diagnosys has a policy of conƟnuous product development and reserves the right to change technical specicaƟons at any Ɵme without prior noƟce. Diagnosys does not accept liability for errors or misprints in this document. Products supplied may vary from those shown. Images are used to show possible applicaƟons and do not necessarily endorse their use. Document: MPSUSF / UK / 09.12

Open the catalog to page 1

Technical Data Sheet Modular power supply Technical specicaƟon SpecicaƟons (per module) The powerpak provides a modular expansion with each module providing a single programmable 20V at 32A oaƟng power rail for connecƟon either as posiƟve or negaƟve supplies. An integrated display on each module shows the programmed voltage and the programmed or actual current. With a small and compact footprint the unit integrates easily with the PinPoint range of test systems. Programmed through the USB 2.0 port in the main chassis, the powerpak integrates with TestVue soŌware and can also be used with other...

Open the catalog to page 2

power pak TM

power pak TM

Catalog excerpts

All Diagnosys catalogs and technical brochures