ANGLED LIGHT BARRIERS WITH IO-LINK
6Pages

ANGLED LIGHT BARRIERS OGL WITH IO-LINK

ANGLED LIGHT BARRIERS WITH IO-LINK: OGL MORE FLEXIBLE, FASTER, MORE PRECISE, SIMPLER AND EVEN MORE RUGGED – WITH THE EXACT SAME SIZE. For decades, di-soric has been developing angled light barriers that set new standards. We are now offering the angled light barrier 4.0 with an innovative dual operation concept, either over IO-Link with the configuration of all sensor functions including 4 selectable sensor modes or through easy manual switching point adjustment with a potentiometer. Ready-to-run: 4 preconfigured sensor modes ¡ ¡ ¡ ¡ Backward compatible with previous di-soric OGL models in...

THE EVOLUTION: ANGLED LIGHT BARRIERS 4.0 APPLICATION-SPECIFIC CONFIGURATION INSTEAD OF SPECIFIC HARDWARE. Instead of keeping various angled light barriers on hand for different applications, you can save the application-specific configuration, load it into the angled light barrier as needed or select the necessary operation mode and get started right away. Device swapping works just as easily. STACK HEIGHT CHECK – OGL 121 G3-T3 With the sensor mode “High Resolution” even the smallest deviations from 0.2 mm can be detected. Contour monitoring of bolts – with a small footprint: Advantage of the...

SMART THANKS TO IO-LINK. SAVE TIME AND MONEY. GET STRAIGHT TO THE POINT. IO-Link provides a point-to-point connection within any network, fieldbus or backplane bus. The IO-Link master can be installed either directly in the field or in the control cabinet. The international IO-Link standard (in accordance with IEC 61131-9) is now regarded as an "enabler for Industry 4.0" Photos of PLCs and modules: © Siemens AG 2017, all rights reserved. 5 REASONS TO CHOOSE OUR OGL WITH IO-LINK. COST REDUCTION thanks to reduced stockkeeping ¡ One sensor can provide the solution for various applications by...

TECHNICAL DATA OGL WITH IO-LINK OGL 05x G3-T3 Housing dimensions H / W / D Branch length inside Operating distance (optical axis) Resolution (Smallest detectable part) Reproducibility Adjustable switching frequency Push-pull/pnp/npn adjustable via IO-Link, 100 mA, NO/NC (switchable via potentiometer or IO-Link) Switching output IO-Link V1.1, COM 2 Smart Sensor Profile Sensitivity adjustment Using potentiometer or IO-Link Standard – General applications High Resolution – For detection of the smallest objects Power – Increased function reserve Speed – Safe detection of fast-moving parts...

© di-soric | All information is supplied without guarantee. Contents may contain mistakes or print errors and are subject to technical changes. | Version 04/18 | BR.OGL.E.2018-04.01 SOLUTIONS. CLEVER. PRACTICAL. di-soric International di-soric GmbH & Co. KG | Germany di-soric Solutions GmbH & Co. KG | Germany di-soric Austria GmbH & Co. KG | Austria di-soric SAS | France di-soric Pte. Ltd. | Singapore www.di-soric.com/international