Products Catalog
20Pages

COMPANY HISTORY ipment icating Equ 0 years! tal Fabr n ore i-Acro® Me as been our specialty for mnd qthaality6that our D u a nt h e anship tion equipm itional craftsm Metal fabrica nue the trad d to conti cation We are prou uilt on. r metal fabri tation was b quipment fo ne ur well repu d parting. O e of precisio complete lin g, folding an rate arin ffer a aintain accu ending, she Today we o ree holes, m g, cutting, b nchin punch burr-f including pu rial waste. allow you to inimize mate d machines designe rtion and m ipment and isto inate part d perated equ bends, elim f manually o industry...

POWER BENDER Power Operated Benders • Model 6 and Model 8 The Di-Acro Power Bender is a hydraulically operated unit that can be configured for a variety of bending operations. The base machine is capable of accepting both Model 6 and Model 8 setups. STANDARD EQUIPMENT < Material length gauge, (not shown). < Electrical equipment conforms to JIC Electrical < Angle control with 4 stops, (not shown). Model 6 Bender • CENTER EYE BENDING • TUBE BENDING • CHANNEL BENDING, FLANGES OUT • EDGEWISE BENDING  Standards for general purpose machine tools. Hydraulic cylinder -with 4” bore produces 3,500...

NO 6 BENDER SETUP Model 6 Setup - For bending TUBING, ANGLE AND CHANNEL. Includes clamps and pressure roller assembly as basic tooling for tube bending. Rotating Arm Toggle Clamp for securing material Toggle Clamp for supporting Follow Block Standard Grooved Collar - for bending round tubing. Used with Clamp Block and Follow Block. When bending materials of open cross section such as tubing, channel, angle and extrusions, the bending form should exactly fit the contour of the material to provide support during the forming operation. This is also true of the Clamp Block and Pressure Tool as...

NO 8 BENDER SETUP Model 8 Setup - For bending SOLID STOCK. Especially suitable for bending eyebolts with centered or off-centered eye bends in one operation. Holding Pin Nose Holder Support Forming Nose Nose Holder er al bend Option an be found c tooling ages 7-11. on p Built Up Forming Nose Built Up Forming Nose - Forms wider materials with special height or stacked collars. Radius Block - For forming solid materials to a tight radius. Requires a standard locking pin to hold material. Radius Collar - Forms solid stock to larger radii. Requires standard locking pin to hold material. Forming...

HAND BENDERS Hand Operated Benders • Models 1 - 1A - 2 - 3 - 4 The Di-Acro Bender is a multi-purpose machine that quickly adapts to a variety of bending operations, whether prototype, production or for duplicating parts with simple, compound or reverse bends in many materials — angle, channel, tubing, rod wire, strip stock, ect. They are “die substitutes” that also produce work not obtainable with dies. The Hand Bender is available in five models with capabilities of bending up to 1" round mild steel bar with a radius of 0 - 12". The Model 4 Bender features a selectable ratchet drive...

HAND BENDER SPECIFICATIONS Model Maximum radius capacity w/o Quik-Lok Maximum radius capacity with Quik-Lok Height of std. forming nose Center pin hole diameter Operating leverage Model 1 Round mild steel bar 3/16" (4.7625mm) Square mild steel bar 1/8" (3.175mm) Steel tubing – 16 ga. 5/16" (7.9375mm) Standard iron pipe – Flat steel bar easy way 1/8x3/4(3.17x19.05) Flat steel bar hard way 1/16x1/2(1.5875x12.7) Machine shipping weight 22 lbs (10 kg) Stand shipping weight – ACCESSORIES &TOOLING AVAILABLE FOR ALL MANUAL BENDERS Our Quik-Lok Clamp can be mounted on all Benders. This accessory is...

BENDER TOOLING Standard Forming Tools The accessories illustrated and listed below are used for bending round, flat, square, hexagon and all other solid materials. These parts are properly hardened to withstand forming pressure and are precision ground for extreme accuracy. They are also available unhardened so they can be further processed by the user for bending materials which must be confined or supported during the bending operation, no extra charge. When ordering tooling for Benders, state model of Bender, centerline or inside radius and material to be bent. HELPFUL TIP SPRINGBACK –...

RADIUS BENDER TOOLING Typical bending capacity for all Di-Acro benders, (based on mild steel). • SOLID BAR– Smallest radius is equal HELPFUL TIP to the diameter of the bar. • TUBING– Smallest centerline radius is equal to 2-1/2 times the tube diameter. 3/16" radius pin 1/2" radius collar Zero radius block 1/2" square block Grooved radius collar–style B (for 3/8" OD tubing to a 1" radius) Clevis clamp 3/8" OD tubing Follow block for 3/8" OD tubing–6" length Forming roller Scroll collar 3/16" radius pin 1/2" radius pin 1" radius collar Zero radius block 5/8" radius pin Grooved radius...

BENDER TOOLING Tube Diameter No.1 No.1A No.2 No.3,4,6 Clamp Block - For Tube Bending Quik-Lok Clamp - Required for use with Style A Radius Collar and Clamp Block when bending tubing. Clamp Block - Used with Quik-Lok Clamp to secure tubing before bending. Follow Block - For Tube Bending HELPFUL TIP When bending materials with an open cross section such as tubing, channel, angle and extrusions the bending form should exactly fit the contour of the material to provide support during the forming operation. This is also true of the clamp block and pressure tool as only by completely confining...

BENDER TOOLING Grooved Radius Collars 1 Bender C/L Radius Groove Radius Collar Style A - Used with Quik-Lok Clamp, Clamp Block and Follow Block, or Grooved Forming Roller or Clevis Clamp for tube bending. 2 Bender Call us for more information about Custom Tooling and One-of-a-kind Set-ups. FOR DETAILS ABOUT STANDARD BENDING APPLICATIONS: Square Crush Bending Tooling – Crush bend tooling is used primarily for bending thin wall tubing to a tight radius. If it is not necessary for the formed section to retain its original shape, such as in structural components, the tubing can be uniformly...