Model 24 Finger Brake
9Pages

SAFETY INFORMATION PG. 3 ANGLE ADJUSTMENT PG. 4 NO. 24 FINGER BRAKE PARTS LIST PG. 5-6-7 MICROMETER BACK GAUGE PG. 8 OPTIONAL STAND PG. 9 WARRANTY & LIMITATION OF LIABILITY PG. 10

Before brake is set up for operation, mount on work bench or stand with brake base flush with the front edge of stand or work bench and bolt in place. *IF BRAKE IS MOUNTED ON ITS OWN STAND, SECURE STAND TO FLOOR Lubricate shaft as needed.

To adjust Brake for bending clearance, raise folding blade 90 degrees, insert material between edges of folding blade and leading edge of fingers (for heavy material, clearance should be twice the thickness, less for lighter gauge or if sharper bend is desired). Adjust finger mount weldment by turning arm adjustment bolts (item 45). To adjust clamping pressure, insert material under fingers and turn arm adjustment bolts until material is held securely when fingers are lowered. To adjust degree of bend, pins (item 47) located on both ends of folding blade for desired degree of bend. Remove...

# 24 FINGER BRAKE PARTS BREAKDOWN 8347820-080

PARTS LIST - CONTINUED

STAND DIMENSIONS ARE: 38” WIDE, 15” DEEP, 33-1/4” HIGH Fasteners needed to attach Finger Brake to stand are the following: (Fasteners to attach stand to floor are not included.)

Defective parts, of a product manufactured by DI-ACRO, will be replaced or repaired at no charge for twelve (12) months following delivery to the original purchaser. Labor is included for the first 90 days. This warranty becomes void when products have not been used according to instructions furnished by DI-ACRO, nor does it cover any altered parts or unauthorized repairs. We cannot be responsible for the cost of repairs made or attempted outside of our factory. All other warranty claims are made FOB our plant, providing such items(s) is returned freight prepaid to our plant for...