Model 2 Punch Press
12Pages

12430 55th St N ■ Oak Park Heights, MN 55082 Phone: 651.342.1756 ■ Fax: 651.342.1293 Email: infb@diacro.com

SET-UP PROCEDURE & MOUNTING PUNCHES & DIES PG. 3 STANDARD & COMMON PUNCH & DIE SHAPES PG. 9-10

SAFETY INSTRUCTIONS Before Punch is set up for operation, mount on work bench or stand*. *IF PUNCH IS MOUNTED ON ITS OWN STAND, SECURE STAND TO FLOOR MAINTENANCE Put Grease in grease fitting periodically.

Shipping Weight After Punch is bolted to the work bench or stand the following procedure is recommended: 1. Remove both right and left hand Stripper Arm from Ram Cap. 2. Insert Punch in Punch Holder and tighten set screw. 3. Insert Die in Die Holder, tighten set screw and mount on Punch. Do not tighten bolts on Die Holder. 4. Pull handle down until Punch enters Die to line up Punch in center of Die. Tighten bolts in Die Holder. 5. Test alignment of Punch and Die by inserting paper and punching by hand. 6. Select the notch in the Stripper V Plate that will provide the most support around the...

#2 HAND PUNCH PRESS PARTS BREAKDOWN 8050810-080

Point Star -330 L-Shape -340 Square D, Allen Bradley, Westinghouse™ Clark, General Electric -390 Westinghouse™ -39E OPTIONAL STAND © Copyright 2014 REV. 8-MAY-2014 1 0

PART NUMBER 8031110-900 STAND DIMENSIONS - 28” WIDE, 15” DEEP, 33-1/4” HIGH CALL DI-ACRO FOR PRICE AND AVAILABILITY Fasteners needed to attach Punch to the stand are the following: (Fasteners to attach stand to floor are not included.)

Defective parts, of a product manufactured by DI-ACRO, will be replaced or repaired at no charge for twelve (12) months following delivery to the original purchaser. Labor is included for the first 90 days. This warranty becomes void when products have not been used according to instructions furnished by DI-ACRO, nor does it cover any altered parts or unauthorized repairs. We cannot be responsible for the cost of repairs made or attempted outside of our factory. All other warranty claims are made FOB our plant, providing such items(s) is returned freight prepaid to our plant for...