Tail lifts for vans > DH-P21

Product catalog summary

Application
The DH-P21 is a fully automatic linear lift designed for installation inside the cargo space of vehicles, specifically in front of the rear doors. It is compatible with a variety of factory-built panel vans and minibuses. The lift features two lift arms for enhanced platform stability and operator safety. It is operated using a 2-button remote control with a spiral cable.

Characteristics & Equipment

Capacity: 450 kg
Type: Two lift arms and two single-acting hydraulic lift cylinders for stability
Platform: Spacious, flat aluminum platform with anti-slip surface, automatic roll-stop, and bridge plate to the loading floor. It includes a mechanical lock for secure positioning during transit.
Controls: Operated via a 2-button wander lead for open/close/lift/lower functions, without electronic components.
Power Pack: Electro-hydraulic, available in 12 or 24V, with manual emergency lowering function and a battery switch.
Lift Height: Maximum of 900 mm above ground level.
Proper Weight: Starting from 140 kg, depending on configuration.
Additional Features: Low maintenance, noise dampening, easy mounting, and compliance with CE safety directives.

Capacity Chart
Various models are available with capacities ranging from 250 kg to 750 kg, including DH-P11, DH-VZ, DH-LSP, and others.

Main Options

Vertically folding platform for unobstructed doorway access.
Non-standard platform widths available.
Foldable platform for reduced fitting height and improved rear visibility.

Other Solutions for Vans
Additional models such as DH-LSPZ, DH-LCZ, and DH-VZ offer capacities from 300 kg to 750 kg, with options for configurations without rear doors.

Catalog excerpts

The DH-P21 is a fully automatic linear lift, suitable for mounting inside the cargo space, just in front of the rear doors of the vehicle. It can be mounted to a wide range of factory built panel vans and The construction with 2 lift arms provides maximum platform stability and increases the sense of The main lift controls consist of a handy 2-button remote control with spiral cable, allowing to operate apacity chart Characteristics & equipment POWER PACK LIFT HEIGHT PROPER WEIGHT 2 lift arms for maximum stability 2 single acting hydraulic lift cylinders Spacious platform with useful space of:...

Open the catalog to page 2

M Main Options (other options on request) S S953 Vertically folding platform for clear and free passage through the doorway (model shown = DH-P20, DH-P21 is excl. safety gates) V i ll f ldi l f f l df h h h d S957 F ld bl platform f reduction i required fitting h i h and f maximum d i ’ view through the rear vehicle Foldable l f for d i in i d i height, d for i driver’s i h h h hi l doors (model shown = DH-P20, DH-P21 is excl. safety gates) S958 Non-standard platform width S955 Bridge plate mounted to platform (side gates = non standard) E Examples of special mountings

Open the catalog to page 3

O Other solutions for vans DH-LSPZ 300-500 kg DH-LSP4 & DH-LC2 500-750 kg DH-LSP Option S604 300-500 kg Without rear doors 500-750 kg DH-VZ 300 kg DH-C 350 kg DH-P11 250 kg www.dhollandia.com • [email protected] • UK : [email protected] EN–03/2008 DH-LCZ

Open the catalog to page 4

All Dhollandia catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list