Best-seller: superior stability and performance The 4-cylinder DH-LM.10 has been DHOLLANDIA's best seller in the light-duty truck range for many years, thanks to its superior stability and performance in comparison to competing 2-cylinder and 3-cylinder lifts, and its excellent price-quality ratio . This lift is now partially superseded by the DH-LMA.08. But it continues to play an important role: for 1000 kg lift capacity ; for platforms above 1800 mm; for vehicles up to 7.5T GVW with a floor height above 1050 mm, and for a number of special executions, such as the half-width lift DH-LMZ.10....

Light-weight aluminium platform, or heavy-duty steel platform Aluminium platform with profiles oriented in longitudinal direction [type V...], and a cross milled anti-slip protection pattern Synthetic rollers for the contact between the platform and the ground FUNCTIONAL & MECHANICAL CHARACTERISTICS • • Aluminium platform with profiles oriented in longitudinal direction [type V...], and a cross milled anti-slip protection pattern Conical / wedge platform. Level ride with automatic tilt at ground level Platform tilt adjustable at any position from the exterior controls HYDRAULICAL CHARACTERISTICS...

SPECIAL EXECUTIONS DH-LMZ = half width or partial width platform (e.g. 3/4). Offers the driver free access to the cargo space inside the van at all times. DH-LMZ or DH-LEZ + OAP206 = vertically folding platform . Offers free access to the cargo space inside the body, but can be deployed to a full-width platform in a matter of seconds. OAP403.1 = horizontally folding platform, full width . Reduces the wind resistance and improves the fuel consumption on open bodies (tray bodies, skeleton bodies etc...).

TECHNICAL CHARACTERISTICS DH-LM.10 Lift frame Rectangular cross tube Cylinders 2 lift cylinders + 2 tilt cylinders Type of ride Wedged platform. Level ride + automatic tilt at ground level Platform material Alu of steel (steel = 1000 kg only) Platform overlap under floor -68 mm Standard platform depths - Steel: 1250 - 1500 mm (max. 1500 mm) - Alu: Variable up to 2550 mm in steps of 5 mm Lift arm lengths - LM.10.05: 550 - 650 mm - LM.10.06: 660 - 845 - 1200 - 1288 mm - LM.10.07: 510 - 750 - 900 - 950 - 1060 - 1177 mm - Adapted to the various brands and types of chassis Standard control unit OAE030.BT.P...

MAIN OPTIONS OAE001 - 2-button wander lead with spiral cable OAE030.BT.P.0 - Joystick controls + battery switch in pump unit OAE041.BP.P.0 - Arctic controls + battery switch in pump unit OAE030.BT.1 - Joystick controls + battery switch (+ turn switch) OAE041.BP.1 - Arctic controls + battery switch (+ push button) OAM025 - Adjustable mounting bracket for control box OAE031.Z.0 - 3+1 button exterior control box without main battery isolator switch OAM026 - Mounting support type B for OAE031.Z OAE048.0 - Control unit with 2 toggle-switches OAE060 - 4-button foot controls in the platform OAE064 -...

MAIN OPTIONS OAE500 - VEHH plug connection for dashboard switch OAE501.12 - VEHH wire connection for dashboard switch 12 m OAE502 - Reed sensor on platform OAE503.1 - Cabin switch (single use) OAE503.2 - Cabin / dashboard switch OAF001 - Lift arm type LMK for trailer coupling OAF100.ST - Fixed 3-piece bumper in steel, mounted to the lift frame OAF103 - Suppl. for preparation of the bumper bar for towing hitch OAM006 - End stop for lift arm against underside of loading floor OAM007 - End stop for lift arm against rear side of loading floor OAM014 - Quick-fit mounting plates per type of vehicle...

MAIN OPTIONS OAH040.50 - Rotating hydr. stabilising leg (1) OAH043.50 - Rotating hydr. stabilizing legs (2) OAH013.40.300 - Hydr. stabilising leg straight 2T 300 mm OAP100.M - 2-piece symm. roll-stops in the platform point - MANUAL OAP100.A - 2-piece symm. roll-stops in the platform point - AUTOMATIC OAP018.01 - Platform of DH-L* in wind-permeable meshed steel OAP021 - 1 standard size side ramp (type A) for OAP020 OAP202.LR - 2 hinged safety rails on L+R side of platform OAP302.A - Extension of the ALUMINIUM platform per 10 cm OAP302.S - Extension of the STEEL platform per 10 cm OAP303 - Non-standard...

MAIN OPTIONS OAP403.1 - Horizontally folding point on DH-L* platform, full width OAP420 - Platform without mechanical lock (on client's request) OAP421.L - 1 standard lock on L-side of aluminium platform OAP421.R - 1 standard lock on R-side of aluminium platform OAP422.L - 1 standard lock on L-side of steel platform OAP422.R - 1 standard lock on R-side of steel platform OAT001 - Kit rubber platform seals - 4 sides - high OAT003 - Kit rubber platform seals - 3 sides - low OAT020 - Reflecting platform flags type TÜV OAT023 - Reflecting platform flags type Export Red OAT104 - Standard finish of...

MAIN OPTIONS OAU005 - Execution for very short mounting space DH-LMP / LEP OAU100 - Control box on L side (R steering wheel for UK)