Prod. # HI-100, DFT® HI-100® Severe Service Control Valve

Product catalog summary

Product Overview: The HI-100® Severe Service Control Valve by DFT® Inc features an in-line Straight-thru, venturi flow design. It utilizes a spherical ball contained by a cage, which positions the ball relative to the downstream seat through linear stem travel. This design ensures smooth and efficient operation even in high or low temperatures and in fluids with suspended particles like slurries.

Specifications: The valve is available in sizes ranging from 0.25 to 8.00 inches, with end connections up to 12 inches. It supports ANSI ratings from 150 to 4500 and can operate in temperatures from -425ºF to 1900ºF (-254ºC to 1038ºC). The valve is constructed from materials such as Alloy Steel, Carbon Steel, High Alloys, and Stainless Steel.

Design and Features: The HI-100® valve features a Quick Change Trim, Straight-Thru design, and offers multiple actuation options including Electric, Hydraulic, Manual, and Pneumatic. It supports Butt Welds and Flanged (RF) ends, and allows for in-line repair with top or bottom entry. The design ensures low operating thrust.

Applications: The valve is suitable for a wide range of applications including Attemperator, Boiler Feed & Discharge, Chemical Lines, Condensate Lines, Crude & Refined Product Lines, Cryogenics, Feedwater Recirculation, Hydraulic Lines, Level Control, Nitrogen Purge, Pressure Control, Pressure Let-Down, Process Lines, Scanners, Soot Blower, Spray Applications, Steam Lines, and Water Lines.

Catalog excerpts

Prod. # HI-100, DFT® HI-100® Severe Service Control Valve-1

DFT® Inc 140 Sheree Blvd. PO Box 566 Exton, PA 19341-0566 Phone: 800.206.4013 Fax: 847.540.1422 Email: [email protected] Website: www.dft-valves.com Prod. # HI-100, DFT® HI-100® Severe Service Control Valve The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear stem travel. There are no close clearances between the moving parts (i.e. cage, ball and seat). These features enable the valve to operate smoothly and efficiently at high or low temperatures, and/or in fluids carrying suspended particles such as slurries. The Quick Change Trim more Inventory | Specifications | Available Valve Specifications | Features | Application Inventory Specifications Series

Open the catalog to page 1

Prod. # HI-100, DFT® HI-100® Severe Service Control Valve-2

Temperature Rating Quick Change Electric Hydraulic Manual Pneumatic Butt Welds Flanged (RF) Available Valve Specifications Alloy Steel Carbon Steel High Alloys Stainless Steel Straight-thru design 1/4" to 8" (End Connection to 12") ANSI 150 to 4500 and Special High Pressure Carbon Steel, Alloy Steel, Stainless and High Alloys Weld End, Flanged or Custom End Prep Temperatures: -425ºF to 1900ºF In-Line repair Quick Change Trim Top or Bottom Entry Low Operating Thrust Manual, Pneumatic, Electric and Hydraulic Actuatio

Open the catalog to page 2

Prod. # HI-100, DFT® HI-100® Severe Service Control Valve-3

Attemperator Boiler Feed & Discharge Chemical Lines Condensate Lines Crude & Refined Product Lines Cryogenics Feedwater Recirculation Hydraulic Lines Level Control Nitrogen Purge Pressure Control, Pressure Let-Down Process Lines Scanners Soot Blower Spray Applications Steam Lines Water Lines

Open the catalog to page 3

Prod. # HI-100, DFT® HI-100® Severe Service Control Valve

Prod. # HI-100, DFT® HI-100® Severe Service Control Valve

Catalog excerpts

All DFT Inc. catalogs and technical brochures