Ultrasonic Particle Size Analyzer (PSM)
7Pages

DF- PSM Ultrasonic Particle Size Analyzer I. Product Overview DF- PSM Ultrasonic Particle Size Monitor (PSM) is an inline instrument measures size of particle within slurry. It can provide accurate and real-time analysis of particle size, PSM is applied to measure particle size distribution from 25 mm to 295 mm with P80 standard. By using the feedback information of PSM, grinding circuit optimization, product quality improvement, recovery rate improvement and energy consumption reduction can be achieved. II. Operating Principle PSM inhales relatively stable and representative slurry stream...

eliminate the influence of bubbles in the slurry and ensures better measurement accuracy. • Application of multiple fraction and multi-stream PSM can analyze up to 5 slurry particle size distributions at the same time, and provides concentration detection without extra expenses. The signal processing technology with large dynamic range enables PSM not only provides 3 channels of slurry particle size detection but also suitable for different processes with different slurry natures. PSM can perfectly fulfill particle size requirements at overflow of primary, secondary and tertiary grinding...

Particle size Particle size under 1mm. 295^m to 25^m in P80 Absolute error < 1.0% (1o) Measuring range Typical precision Concentration Measuring range 4~60% w.t (1-70%vol, depends on the dry ore density) Typical precision Absolute error < 1.0% (1o) communication PROFIBUS general (optional) 3.5m*2.8m horizontal space, 2.5m vertical space for base, the base shall be capable for hold up 1500kg weight -10~+50°C 0~98% relative humidity (no condensing) <10g, 20Hz Nominal operating condition Installation condition Installation platform Ambient condition Ambient temperature Ambient...

Protection level «^DFMC Weight Around 880kg Display & Control Note: Product technical parameters provided above are standard type, practical information shall subject to real conditions at site. Grinding process of non-ferrous metal, ferrous metal and other industries, including: • Iron ore, magnetite ferrous mining • Gold, copper, molybdenum, lead-zinc etc. Coal cinder, slag slurry and other non-metal mineral processing

Particle size measurement at cyclone Particle size measurement at cyclone overflow in iron processing plant overflow in copper processing plant

Add.: No.136 Binjiang Middle Road, Yanjiang Development Zone, Dandong, Liaoning, China Tel.: +86 415 3862214 Fax: +86 415 3862272 E-mail: intersales@dfmc.cc http://en.dfmc.cc/