Particle Size Analyzer (PSI)

Product catalog summary

Product Overview
The PSI Online Diameter-measuring Particle Size Analyzer is an industrial instrument designed for automatic and real-time measurement of particle sizes. It comprises a main control box, detector, and installer. The device uses a high precision displacement sensor to measure particle diameters and performs statistical analysis to provide reliable results. It is adaptable to various applications and environments.

Operating Principle
The PSI uses a high precision displacement sensor to measure particle diameters, converting these measurements into electrical signals for analysis. It is designed to function in harsh environments, including high temperatures and corrosive conditions, and is not affected by bubbles, large particles, or magnetic disturbances. The device can measure particle sizes ranging from 20μm to 1000μm.

Product Features
The PSI is made from heat and corrosion-resistant materials, allowing it to operate in challenging industrial settings. It requires minimal calibration and can measure a wide range of particle sizes. The device outputs data in real-time and can display information in various formats.

Technical Parameters
The PSI operates with a single stream and measures particle sizes with an absolute error of 1-2%. It provides analog output signals and operates under specific environmental conditions, including temperatures from 0 to 50°C and humidity up to 95%. The device is powered by AC 220V and includes an industrial tablet PC for monitoring and control.

Applications
The PSI is primarily used in the ore dressing and chemical industries. It is crucial for measuring particle sizes in ore processing, impacting energy consumption and product quality. The device is also suitable for environments with solid impurities and corrosive materials.

Contact Information
Address: No.136 Binjiang Middle Road, Yanjiang Development Zone, Dandong, Liaoning, China
Tel: +86 415 3862214
Fax: +86 415 3862272
Email: [email protected]
Website: http://en.dfmc.cc/

Catalog excerpts

PSI Online Diameter-measuring Particle Size Analyzer I. Product Overview PSI Online Diameter-measuring Particle Size Analyzer (PSI) is an online smart industrial instrument to measure particle sizes in an automatic and real-time mode. It consists of three parts -- main control box, detector and installer. PSI directly measures microcosmic approximate diameter of particles by high precision displacement sensor, then, it makes statistical analysis on measurement results. It has strong adaptability in applications. The measurement result is intuitional, stable and reliable. II. Operating Principle...

Open the catalog to page 2

III. Product Features • Strong environment adaptability The detector of PSI is made of heat-resistant material and corrosion-resistant material. It has low requirements on environment and can adapt to harsh industrial environments, for example, high-temperature environment (<90°C) and highly corrosive environment (alkali). • No special requirements on composition of measured materials 1. Not influenced by bubbles: PSI is not sensitive to bubbles in measured materials; 2. Less affected by large particles: PSI has low requirements on the content of large particles in measured materials. A few large...

Open the catalog to page 3

V. Applications PSI is mainly used for particle size measurement. It is able to analyze particle sizes of hard particles in solid-liquid pulp with flow ability. PSI are mainly used for the following industries: 1. Ore dressing industry Particle size is an important technical index in ore dressing industry, which has direct impact on energy consumption, efficiency, percent of pass and quality of finished products, etc. During ore dressing process, PSI can be used for ore grinding and dressing fields in the following industries: basic metal industry, ferrous metal industry, industrial mineral industry,...

Open the catalog to page 5

PSI at cyclone overflow in a bauxite processing plant

Open the catalog to page 6

Add.: No.136 Binjiang Middle Road, Yanjiang Development Zone, Dandong, Liaoning, China Tel.: +86 415 3862214 Fax: +86 415 3862272 E-mail: [email protected] http://en.dfmc.cc/

Open the catalog to page 7

All DFMC catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list