LEALaser Elemental Analyzer http://en.dfmc.cc

Laser Elemental Analyzer 1. Product Overview Laser Elemental Analyzer (LEA) is based on laser element analysis technology (LEAT). It can replace traditional chemical analysis methods and achieve rapid analysis of the tested material. The online or by-pass elemental detection and analysis for solid material can be realized in the process flow. Meanwhile, liquid materials contents also can be detected and analyzed by plug-in or flow-leading method. LEA can analyze the content of major elements in real time and can meet the real-time detection requirements for material composition and industrial...

LEAT Solid Material Multi-elemental Analyzer (Online) LEAT Solid Material Multi-elemental Analyzer (By pass)

LEA adopts laser spectroscopy analysis technology. This technique is an element analysis technique based on atomic emission spectrum and laser plasma emission spectrum. The pulsed laser with high power and high energy density is used to irradiate the tested material. It instantly reaches a high temperature above 6000°C and burns the surface of the tested material. Under the action of high temperature, the surface of the tested material absorbs photons to generate initial free electrons. Under the further action of laser power, atoms absorb energy to generate more free electrons and cause avalanche...

Periodic Table 4. Product Features ■ It can realize high precision full element measurement, PPM level content detection. ■ Non-contact, rapid, continuous, large amount of material detection. ■ Solid material, liquid material detection. ■ It is almost non-destructive testing, the consumption material is only calculated by gram. ■ No radioactivity, excellent safety, the work safety of frontline personnel is guaranteed. ■ Low cost of use and maintenance. ■ Well-adapted at site, little modification to the process transformation. 5. Technical Paramete ■ Cx Hx O> Nx Six Alx Fex Cax...

Power supply: AC 220V 50Hz, power consumption is less than 2000W. Research on the testing technology of the main coal quality characteristics of the coal as fired in power plant, including the important coal quality indexes that affect the safety, economy and clean combustion of the boiler in the power plant: calorific value, volatile, coal ash fusibility, moisture content and ash content; Detect alkali metal elements (K, Na) in coal; Detect sulfur dioxide and nitrogen oxide generation index; Detect trace harmful elements (As, Hg) and so on; Composition analysis of cement raw meal, clinker, sintered...

Add.: No.136 Binjiang Middle Road, Yanjiang Development Zone, Dandong, Liaoning, China Tel.: +86 415 3862214 Fax: +86 415 3862272 E-mail: [email protected] http://en.dfmc.cc/