high speed fuse links for semiconductors

UCTORS MICOND DUCTORS FOR SE N LINKS S FOR SEMICOMICONDUCTORS E FUSE E LINK S FOR S PEED IGH S D FUS E LINK aR H SPEE D FUS

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS aR SEMICONDUCTOR FUSE LINKS and have been designed and manufactured to have very low I t RAPIDPLUS aR fuse links are intended to clearing short-circuits 2 values as well as reduced arc voltages that guarantee an optimum protection of semiconductors. They have a very good cycling ability. RAPIDPLUS aR range comprise three sizes with dimensions 10x38, 14x51 and 22x58, with rated currents between 4A and 100A and a rated voltage of 690 V AC. Sizes 14x51 and 22x58 are available also with striker, for use in fuse bases with microswitch. Made of ceramic tubes...

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS gR SEMICONDUCTOR FUSE LINKSof overcurrents, overloads as well as short-circuits, thus the fuse links protect RAPIDPLUS gR fuse links are capable to clearing all types semiconductors as well as cables and all switchgear of installation. RAPIDPLUS gR range comprise three sizes with dimensions 10x38, 14x51 and 22x58, with rated currents between 4A and 100A and a rated voltage of 690V AC. Sizes 14x51 and 22x58 are available also with striker, for use in fuse bases with microswitch. Typical application comprise protection of semiconductors (diodes, thyristors,...

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS NEW gS RAPIDPLUS NH gS fuse links are capable to clearing all types of overcurrents, overloads as well as short-circuits, thus the fuse NH SEMICONDUCTOR FUSE LINKS links protect semiconductors as well as cables and all switchgear of installation. They are optimized to have reduced power dissipations that allow the utilization of a wide range of fuse-bases and fuse-switch disconnectors. RAPIDPLUS NH gS range comprise five sizes NH000, NH00, NH1, NH2 and NH3 with rated currents between 20A and 630A and a rated voltage of 690V AC. Typical application comprise...

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS DIMENSIONS & TECHNICAL DATA Correction Factorfor Power Loss (Cp) The total clearing l2tat rated voltage and at power factor of 0,15 are given in the electrical characteristics. For other voltages, the clearing l2t is found by multipliying by correction factor, K, given as a function of applied working voltage, Eg (RMS). Power loose(Cp) Watts loss at rated current are given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated value. The correction factor Cp,...

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS aR SEMICONDUCTOR FUSE LINKS DIMENSIONS & TECHNICAL DATA TECHNICAL Correction Factor for Power Loss (Cp)

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS ' SEMICONDUCTOR FUSE LINKS DIMENSIONS & TECHNICAL DATA Correction Factor for Power Loss (Cp)

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS aR SEMICONDUCTOR FUSE LINKS t-I CHARACTERISTICS TECHNICAL aR SEMICONDUCTOR FUSES CUT-OFF CHARACTERISTICS TECHNICAL Maximum value of current (kA peak) Maximum value of current (kA peak) Maximum value of current (kA peak)

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS DIMENSIONS & TECHNICAL DATA Correction Factor for Power Loss (Cp)

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS DIMENSIONS & TECHNICAL DATA Correction Factor for Power Loss (Cp) In lzt Prearcing Operating l2t @ 690 V Power loss 0.8 • ln Power loss In

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS DIMENSIONS & TECHNICAL DATA In lzt Prearcing Operating l2t @ 690 V Power loss 0.8 • ln Power loss In

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS gR SEMICONDUCTOR FUSE LINKS t-I CHARACTERISTICS TECHNICAL gR SEMICONDUCTOR FUSES CUT-OFF CHARACTERISTICS TECHNICAL Maximum value of current (kA peak) Maximum value of current (kA peak) Maximum value of current (kA peak)

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS CUT-OFF CHARACTERISTICS

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS ' ' SEMICONDUCTOR FUSE LINKS TECHNICAL DATA

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS TECHNICAL DATA Correction Factor for Power Loss (Cp)

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS ' ' SEMICONDUCTOR FUSE LINKS TECHNICAL DATA

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS SEMICONDUCTOR FUSE LINKS TECHNICAL DATA Correction Factor for Power Loss (Cp)

HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS ' ' SEMICONDUCTOR FUSE LINKS USE OF SEMICONDUCTOR FUSE LINKS (RAPIDPLUS) IN PMC, PMF & PMX MODULAR FUSE HOLDERS AND The modular fuse holders for cylindrical fuses have a rated power acceptance according to the maximum power dissipations allowed for the general use fuse links (gG) and back up fuse links. These maximum values allowed for the fuse links (gG/aM) are regulated by standards (IEC/EN60269-2). In the same way, this standards specify the minimum power acceptance for the fuse holders. This power acceptance is the power dissipated by the fuse links...

SPECIAL FUSES

HEAD OFFICE & FACTORY EXPORT SALES NATIONAL SALES