P200 SERIES POSITIONERS Critical Performance The P200 (pneumatic) and P201-P204 (electropneumatic) positioners are designed for critical control applications. Valves with double acting actuators and the P200 series positioners meet the most demanding valve performance specifications. Span and Zero Calibration is made very simple with the externally adjustable span and zero. Once the center zero screw is set first, the span screw can be adjusted with very little interaction. These adjustments can be made without removing the positioner’s cover if needed. coating. The P200 and P201 are Nema 4X and IP 66 approved. Split Range Output/Field Reversible In addition to Nema 4X/IP66, the following approvals can be specified: The standard stainless steel cam offers several signal input options; 90 degree full scale, 90 degree split range or 180 degree full scale operation. Other cam options are available for special applications and characterization. Positioner operation can be reversed in the field by flipping the cam and reversing the ports on double-acting actuators, and simply flipping the cam on springreturn actuators. Dual scaling on the positioner cover provides for mechanical pointer adjustment for CW or CCW rotation. High Performance, Long Life The unique spool valve design is key to the positioner’s accuracy and control. The gold plated stainless spool in combination with the stainless seats provide a smooth, corrosion-resistant operation in a wide range of applications. The unique guiding of the spool throughout its travel, and the special porting provide trouble-free operation in most applications. Sealed Housing The P200 series units are sealed and vented through a tapped exhaust port. Vent valves along with positive internal pressure allow for constant liquid drainage. The housing is die cast aluminum and protected with an industrial grade polyester © 2013 DeZURIK, Inc. Explosion Proof (P202) • ATEX – EEx d IIB + H2 T4 • FM/CSA – Cl 1 Div 1 & 2 Gps B,C,D T6 Intrinsically Safe (P203) • ATEX – EEx ia IIC T4/T6 • FM – Cl 1 Div 1 Grp A-D • CSA – Ex ia, Cl 1 Grp A-D, Cl 1 DIV2 Grp A-D I/P Conversion Pneumatic positioners can be easily field converted to electropneumatic with the compact and modular I/P converter module. No special gaskets or unusual parts are needed. Small 20 micron filters act as a secondary filter for the P200 and P204. It is recommended that a good primary filter be used with these instruments. Air quality specs should meet those published by ISA-S7.3.81 Accurate, Precise Valve Control The high flow/high gain spool valve assembly has air delivery of over 28 SCFM. This provides for quick and accurate control on a wide range of applications. Valve position readout is clearly shown with the dual scale, bright pointer indicator. A dome styl

Positioner Specifications Order Code Input Impedance Temperature Range * Check maximum pressure of actuator; regulator may be required. Ordering The P200 series can be used with double acting or spring return, pneumatic actuators. For spring return applications (single acting) one port should be plugged. Positioner Options Positioners P200, 3-15 PSI Pneumatic Positioner NEMA 4X and IP66, Double/Single Acting W/ Arrow Indicator P201, 4-20 mA Electro-pneumatic Positioner NEMA 4X and IP66, Double/Single Acting W/ Arrow Indicator P202 Explosion Proof, 4-20 mA Electro-pneumatic Positioner NEMA 4X...