 Sampling: 2 MS/s per channel at 16-bit; 24-bit in oversampling mode  ADC: Low noise, SAR  Input ranges Module specifications TRION-1620-ACC/LV specifica�ons Input channels 6 channels BNC, voltage input; IEPE®; 1 counter 6 channels 1B LEMO, voltage or current input, 1 to 28 V sensor supply, TEDS TRION-1620-ACC-6-L1B Sampling rate / resolution 6 channels BNC, voltage input 6 channels 1B LEMO, voltage or current input, IEPE®, 1 counter, sensor supply, TEDS Highspeed mode Over sampling mode Data transfer Data rate DMA transfer 6 analog channels: max 24 MB/s; 1 x counter: max. 16 MB/s SAR (Successive Approximation Register) Input ranges – Voltage TRION/TRION3 series modules • Technical reference • Printing vers

TRION-1620-ACC/LV TRION sub modules TRION-1620-ACC/LV specifica�ons Input noise (5 mV range) – 0 to 10 Hz – Noise density Input impedance Current input Internal 10 Ω shunt; max. 100 mA protected with rese�able fuse Input bias current Input coupling Gain dri� Typically 10 ppm/°C max. 20 ppm/°C Offset dri� Typically 0.3 μV/°C + 10 ppm of range/°C, max 15 μV/°C + 20 ppm of range/°C Input configuration Isolation impedance Isolation resistance >1 GΩ; Isolation capacitance typically 15 pF Rated input voltage to earth according to EN 61010-2-30 Isolation voltage (channel-to-channel and channel-to-chassis)...

TRION sub modules TRION-1620-ACC/LV specifica�ons Analog anti-aliasing filter 2nd order Bessel, automatically selected Bandwidth (-3 dB, deactivated digital filter) 1 MHz 2nd order Bessel filter Channel-to-channel phase mismatch Typically <10 ns when using the same range; <60 ns for using different ranges Board-to-board phase mismatch 1x counter channel linked to analog channel #1; trigger level 70 % of actual analog input range Counter modes Event counting, period, frequency, pulse width, duty cycle Counter input bandwidth 1 MHz to 10 kHz depending on analog filter of CH1 IEC61000-4-2: ±8 kV air discharge,...