TRION Series
18Pages

{{requestButtons}}

Catalog excerpts

TRION Series - 1

Series Modules Overview ANALOG Modules Safety banana sockets Current (shunt needed) DIGITAL Modules Sample rate Resolution per channel SuperCounter™ inputs Connector Type DEDICATED Modules GPS antenna, IRIG In / Out, DIO, CNT, SYNC, AUX Connector Type Connector Type Sample rate Resolution per channel n/a GPS antenna, IRIG In / Out, DIO, CNT, SYNC, AUX Signal Conditioning Sample rate Resolution per channel Dedicated Instruments Series Modules

Open the catalog to page 1
TRION Series - 2

Series Modules Differential multi-function input module Voltage measurement from ±30 mV to ±70 V DC (46.7 V RMS AC) IEPE Resistance Current (using external shunt) Additional feature: TRION-dACC specifications Input channels AUX socket (SMB version only) Sampling rate Resolution Input ranges Voltage IEPE Resistance Current Voltage input accuracy Gain drift Offset drift linearity Input impedance Input bias current Input configuration Input coupling Sensor fault detection for IEPE Excitation current Accuracy Drift Compliance voltage Output impedance Supported sensors Counter Channels Counter...

Open the catalog to page 2
TRION Series - 3

Termination open end BNC cable socket TRION modules TRION-x-dACC-x-SMB TRION-x-dACC-x-SMB Dedicated Instruments TRION-2402-dACC-6-BNC: 6x BNC sockets Appr. 210 g (SMB version), appr.270 g (BNC version) Signal Conditioning 200 V peak input to GND DS2406, DS2430A, DS2431, DS2432, DS2433 Typ 10 W + excitation power TRION-2402-dACC-8-SMB: 8x SMB sockets for inputs, 1 SMB socket for AUX Over voltage protection Supported TEDS chips Power consumption Connectors Series Modules

Open the catalog to page 3
TRION Series - 4

Series Modules Isolated voltage / IEPE input module 16 bit 2 MS/s per channel 24 bit 1 MS/s per channel Voltage IEPE TRION-1620-series specifications Input channels 6 channels BNC; voltage input 6 channels BNC; voltage input; IEPE®; 1 counter 6 channels LEMO; voltage input; 5/12 V sensor supply; TEDS Sampling Rate / Resolution High speed mode Over Sampling mode Data Transfer ADC type Data rate DMA transfer Input ranges Input noise (5 mV range) >1 to 2 MS/s, 16-bit 100 S/s to 1MS/s, 24-bit 16-bit / 24-bit SAR (Successive Approximation Register) Voltage IEPE® Input impedance Input bias...

Open the catalog to page 4
TRION Series - 5

Series Modules Isolated voltage input module Data rate DMA transfer Input ranges Input noise (5 mV range) Input impedance Input bias current Input coupling Accuracy2) Gain drift Offset drift Linearity Input configuration Isolation impedance Isolation voltage Signal-to-noise ratio, Spurious free SNR, Effective number of Bits Sample rate 1 kS/s 10 kS/s 100 kS/s 250 kS/s Typical CMRR ≤2 V range >2 V range Low pass Filter (-3 dB, digital) Characterisic Filter order Analog antialiasing filter Bandwidth (-3 dB, deactivated digital filter) Crosstalk fin 1 kHz [10 kHz] Channel to channel phase...

Open the catalog to page 5
TRION Series - 6

Series Modules TRION-2402-dSTG Differential universal input module TRION-dSTG specifications Input channels Voltage up to ±10 V Strain gauge, bridge sensor, piezoresistive bridge IEPE RTD; Pt100 to Pt2000 Resistance, potentiometer Input types: Sampling rate Resolution Input ranges Voltage Bridge IEPE Resistance Current Voltage input accuracy Gain drift Offset drift linearity Input impedance Input bias current Input configuration Input coupling Excitation voltage Accuracy Drift Current limit Protection Excitation current Accuracy Drift Compliance voltage Output impedance IEPE Excitation...

Open the catalog to page 6
TRION Series - 7

Series Modules Appr. 200 g (RJ45 version), appr. 250 g (LEMO version) Termination open end DSUB-9 socket (DAQP-STG/MDAQ-STG compatible) BNC open end DSUB-9 socket (DAQP-STG/MDAQ-STG compatible) TRION modules TRION-x-dSTG-x-RJ TRION-x-dSTG-x-RJ TRION-x-dSTG-x-RJ TRION-x-dSTG-x-LEMO TRION-x-dSTG-x-LEMO TRION modules TRION-x-dSTG-x-LEMO Mating connector Connector Termination mating connector, for cable diameter 4.1 to 5.0 mm Signal Conditioning TRION cables Dedicated Instruments Crosstalk fin 1 kHz [10 kHz] Inter channel phase mismatch Common mode voltage Over voltage protection Supported TEDS...

Open the catalog to page 7
TRION Series - 8

Series Modules Isolated wide range voltage module Input types: Input channels Sampling rate Resolution Input ranges Voltage Current Voltage input accuracy Range > 10 V Offset drift Gain drift Linearity Input impedance Input bias current Input coupling Input configuration Typical SNR ±0.3 V, ±1 V, ±3 V, ±10 V, ±30 V, ±100 V, ±400 V and ±1000 V(2) Depending on external Shunt; e.g. 20 mA, 1 A, 5 A Signal frequency Accuracy DC to 1 kHz ±0.02 % of reading ±0.02 % of range ±3 mV >1 kHz to 5 kHz ±0.3 % of reading ±0.02 % of range ±3 mV >5 kHz to 10 kHz ±1 % of reading ±0.02 % of range ±3 mV DC to...

Open the catalog to page 8
TRION Series - 9

Series Modules Signal Conditioning DAQ-SHUNT1 (not compatible with TRION-x-V-4 modules) Dedicated Instruments 20 mA shunt adaptor (50 Ohm, ±0.1 %, 1 W); Fitting into 4 mm banana jacks with 19 mm distance Not compatible with TRION-x-V-4-B 20 mA shunt adaptor (50 Ohm, ±0.1 %, 1 W); Fitting into 4 mm banana jacks - also for TRION-x-V-4-B 5 A shunt box (100 mOhm, ±0.1%, <10ppm); Current input via 2 safety banana jacks, output 2x 0.3 m cable with banana plugs 5 A shunt box (100 mOhm, ±0.1%, <10ppm); Current input via 2 safety banana jacks, output via 2 safety banana jacks Shunts for TRION™...

Open the catalog to page 9
TRION Series - 10

Series Modules Counter, DIO and synchronization module 2 SuperCounters™ IRIG code B, DC I/O and Sync I/O Additional features: 1 AUX socket (by default set to camera trigger) TRION-BASE Counter channels: TRION-BASE specifications Digital I/O specifications Number of channels Compatibility (Input) Compatibility (Output) Overvoltage protection ±30 V permanent, 50 V peak (for 100 msec) Sensor power supply (module total) Sync I/O specifications Functionality Acquistion clock and trigger output (can be used to sync two systems/enclosures) Compatibility (Input) Compatibility (Output) Overvoltage...

Open the catalog to page 10
TRION Series - 11

Series Modules Timing and synchronization module 1 Hz update rate (requires GPS antenna) Additional features: TRION-TIMING specifications IRIG input specifications Supported codes: DC Level Shift TTL / CMOS compatible IRIG output specifications IRIG code B, DC Adjustment range Clock accuracy IRIG locked without drift Clock accuracy IRIG unlocked Max. cable length (IRIG) 1000 m, cable length delay compensation available Isolation voltage GPS specifications 12 channel, L1 frequency receiver Position accuracy Trigger accuracy Clock accuracy locked without drift Clock accuracy unlocked...

Open the catalog to page 11

All DEWETRON GmbH catalogs and technical brochures

  1. CVT Logger

    1 Pages

  2. DEWE-2600

    3 Pages

  3. DEWE2

    46 Pages

Archived catalogs

  1. DEWE-CLOCK

    2 Pages

  2. DEWE-501

    4 Pages

  3. Mainframes

    16 Pages