Dynamic Signal Analyzers
4Pages

{{requestButtons}}

Catalog excerpts

Dynamic Signal Analyzers - 1

24 bit resolution 204.8 kS/s sampling rate per channel with auto-switching anti-aliasing filter Simultaneous sampling of analog channels Synchronous counter/encoder inputs and digital I/Os MODAL ANALYSIS - There is a wide range of applications in the fields of structural analysis, machinery diagnosis and Optional synchronous CAN bus data and video industrial acoustics. For example modal analysis is needed from one or more cameras in every modern construction. The measurement of system Very powerful software parameters, called modal parameters, is essential to predict the behavior of a structure. These modal parameters are needed also for mathematical models. Parameters like resonant frequency(s), structural damping, and mode shapes are experimentally measured and calculated. DEWETRON provides a complete modal package (hard and software) which is adapted to your application. Starting up from 8 channels used for maintenance, service and troubleshooting till up to 1000 channels used for complex structures. The easy-to-use software is suitable for professional and occasional users. ROTATIONAL AND TORSIONAL VIBRATION - Rotating machines and engines are sources of Rotational and Torsional Vibration. Rotational vibration is a result of the change in shaft speed during one revolution and torsional vibration is due to angular twist in the shaft or drive train which may cause fatigue. DEWETRON dynamic signal analyzers are all in one measurement instruments which enable you to observe vibration, force, strain, voltage, current, power, CAN data, rotational and torsional vibration at the same time. ORDER TRACKING - Very often errors and unobvious faults on rotating machines can be seen easier during the run up and run down. One method to analyze these conditions is order tracking. With this method you can separate frequency components which are related to engine speed and which are related to structure. BALANCING - Another typical DSA application is balancing. It is well-known that the vibrations of the steering wheel of a car depend on different speeds. But why? Why are some machines louder than others although they work at the same speed? And why do vibrations on the chassis of rotating machines occur depending on certain speeds? One of the reasons for all these phenomena is unbalance. Very often unbalance reduces the lifespan of machines, which causes very high service costs or in some cases even the end of life of the machines. DEWETRON DSA instruments provide a very easy to use and straightforward tool for single and dual plane balancing. Measurements for structural analysis, machinery diagnosis and industrial acoustics Signal Conditioning Noise. Vibration. Shock. Recording. These parameters require a DSA (dynamic signal analyzer). That means that the front-end is made exactly to interface with accelerometers and microphones. It also means 24 bit resolution, simultaneous sampling, and anti-aliasing filtering. DEWETRON builds analyzers for dynamic data, in a variety of form factors. There are dedicated instruments from 4 to 48 channels and all run the same easy-to-use software which is suitable for professional users as well as for occasional ones. DEWE-DSA ... Flexibility as needed Dynamic Signal Analyzer Instruments Dedicated Instruments Dynamic Signal Analyzer

Open the catalog to page 1
Dynamic Signal Analyzers - 2

Dynamic Signal Analyzer DSA Instruments with TRION™ Modules Add your choice of TRION2402-x modules and software DS-UP-TRION-BASIC-DSA to complete these instruments DEWE2-A4 Removable Solid State Disk (MLC type) Hard disk Hard disk 10 to 36 VDC (isolated); incl. external AC power supply add internal buffer battery for ~ 10 min. operation and/or DW2-UPS-150-DC (ext. battery pack) Battery powered, 3 battery slots , 3 batt. for ~2 hours operation included, incl. external AC power supply,optional external DC power supply Battery powered, 3 battery slots 3), 3 batt. for ~2 hours operation...

Open the catalog to page 2
Dynamic Signal Analyzers - 3

Dynamic Signal Analyzer Only your choice of DAQP modules is required to complete these instruments DEWE-3300-DSA-8 16 slots for DAQP modules 16 slots for DAQP modules 16 slots for DAQP modules Internal quasi-static temperature inputs External quasi-static channel expansion EPAD interface, up to 2 EPAD2 modules = 16 ch Dynamic analog input channels EPAD interface, up to 16 EPAD2 modules = 128 ch A/D conversion Sampling method Simultaneous sampling Sampling rate Digital I/O and counters Digital I/O Counters / digital inputs 2 counters or 8 digital inputs, TTL level Dedicated Instruments DSA...

Open the catalog to page 3
Dynamic Signal Analyzers - 4

Dynamic Signal Analyzer DSA Instruments with Voltage / IEPE ® Inputs Nothing is required to complete these instruments. Supported analog input signals Voltage ±10 V or IEPE® inputs with sensor break detection Voltage ±10 V or IEPE® inputs with sensor break detection Internal quasi-static temperature inputs External quasi-static channel expansion EPAD interface, up to 16 EPAD2 modules = 128 ch A/D conversion Sampling method Simultaneous sampling Sampling rate Digital I/O and counters Digital I/O Counters / digital inputs 2 counters or 8 digital inputs, TTL level Solid State Disk optional 2...

Open the catalog to page 4

All DEWETRON GmbH catalogs and technical brochures

  1. CVT Logger

    1 Pages

  2. DEWE-2600

    3 Pages

  3. DEWE2

    46 Pages

Archived catalogs

  1. DEWE-CLOCK

    2 Pages

  2. TRION Series

    18 Pages

  3. DEWE-501

    4 Pages

  4. Mainframes

    16 Pages