DEUTZ TCD 7.8 For agricultural machinery 190–291 kW | 255-390 hp at 2100–2200 min-1 / rpm | EU Stage V / US EPA Tier 4 The DEUTZ TCD 7.8 is the compact, water-cooled 6-cylinder inline engine for agricultural machinery with a power range from 255 to 390 hp. It already complies with the requirement of EU Stage V effective January 2019. The engine has two-stage turbocharging, charge air-cooling and cooled external exhaust gas recirculation. discover the TCD 7.8 Water-cooled 6-cylinder inline engine with two-stage turbocharging, charge air cooling and cooled external exhaust gas recirculation. Engine and exhaust aftertreatment (EAT) are optimised for highest total system efficiency and thus ensure minimised fuel and total operating cost. The powerful DEUTZ Common Rail (DCR®) injection system and the electronic engine control (EMR 4) with intelligent link to the drive management ensure optimum engine performance at low fuel consumption. 500 h oil change intervals and easy changing of the engine fluids reduce the running cost and increase the availability of the machinery. 100% power take-off at flywheel and front end. Best cold starting performance even under extreme conditions. The extremely compact engine design with structural oil pan and a customer oriented, modular system of optional add-on parts reduce the installation cost and increase the number of applications. Consistent installation and connection dimensions of the engine facilitate the changeover of existing installations to the next stage of the emission legislation. The engines meet the requirements of the EU Stage IV and US EPA Tier 4 with DVERT® selective catalytic reduction (SCR) and particulate filter (DPF). Through the use of the DPF they already comply with the EU Stage V emissions standard expected from 2019.* A variant without EAT is available as an option for less regulated markets. Technical data Engine type No. of cylinders Bore/stroke Displacement Max. nominal speed Engine type Power output as per ISO 14396 1) at speed Max. power at speed Max. torque at speed minimum idling speed Specific fuel consumption 2) Weight kW | hp min-1 | rpm kW | hp min-1 | rpm Nm | lb/ft min-1 | rpm min-1 | rpm g/kWh | lb/hph kg | lb * Based on the proposal by the EU Commission COM (2014) 581 final from 25.09.2014. 1) Power data without deduction of fan power. 2) Best point consumption refers to diesel with a density of 0.835 kg/dm3 at 15°C.

for agricultural machinery | DEUTZ TCD 7.8 Torque Curve TTCD 7.8 L6 - 291 kW | 390 hp n Standard Note: The engine dimensions and weights vary depending on the scope of delivery. DEUTZ AG Ottostraße 1 51149 Köln Deutschland Tel. +49 221 822-0 Fax +49 221 822-3525 [email protected] www.deutz.com 62 65 3007 E-mail: [email protected] www.deutz.com.sg Lorem Ipsum dolor Deutz and Deutz-Logo are registered trade marks. Technical changes are subject to alterations.