Catalog excerpts
2011. The Genset Engine. 12 - 60 kVA at 1500/1800 min-1 | rpm The engine with external oil cooling system. These are the characteristics of the 2011 Gen: 2, 3 and 4 cylinder naturally aspirated in-line engines. 4 cylinder model also with turbocharging. Displacement: 0.78 l/cylinder. Fully oil-cooled (engine with conventional cooling system) Acoustically optimized crankcase. All service points on the same engine side. Electronic engine governor (option). Compact design and low weight. Worldwide service network with over 1,000 locations. Your benefits: Low noise emission, cost savings as no noise attenuation measures are required. Long oil change intervals: 1,000-hour / turbocharged engines 500 hour and low fuel consumption bring savings in operating cost. Low installation cost. Excellent load takeover characteristics ensure prompt power supply. Combined oil cooling and lubrication prevents corrosion and cavitation. High reliability and durability together with reduced maintenance requirement and wear parts. Dimensions and weights F2M 2011 Length: mm | inch 845 | 33.0 Width: mm | inch 643 | 25.1 Height: mm | inch 762 | 29.7 Weight: kg | lb 206 | 454 F3M 2011 Length: mm | inch 956 | 37.3 Width: mm | inch 616 | 24.0 Height: mm | inch 761 | 29.7 Weight: kg | lb 247 | 545 F4M 2011 Length: mm | inch 1067 | 41.6 Width: mm | inch 616 | 24.0 Height: mm | inch 778 | 30.3 Weight: kg | lb 285 | 628 BF4M 2011 Length: mm | inch 1080 | 42.1 Width: mm | inch 649 | 25.3 Height: mm | inch 787 | 30.7 Weight: kg | lb 286 | 631 BF4M 2011 C Length: mm | inch 1183 | 46.1 Width: mm | inch 717 | 28.0 Height: mm | inch 807 | 31.4 Weight: kg | lb 350 | 772
Open the catalog to page 1Best.-Nr. 0031 2046 / 11 / 2008 / VI-K u Rating table: 2011. The Genset Engine. 50 Hz Standard specification Standard engine: Flywheel housing SAE 3; flywheel with 11.5” connection. Cooling system: Cooling unit, V-belt guard, pusher-type fan. Filter: Dry air cleaner with mechanical restriction indicator, fuel filter. Engine electrics: Alternator 14 V, 55 A; starter motor with 12 V, 3.1 kW. Governor: Mechanical (Bosch). Engine type F2M2011 F3M2011 F4M2011 BF4M2011 BF4M2011C Speed min-1| rpm 1500 1500 1500 1500 1500 Frequency Hz 50 50 50 50 50 Engine/genset ratings 1) Continuous power, ICN...
Open the catalog to page 2All DEUTZ catalogs and technical brochures
-
DEUTZ TCD 12.0/16.0 2022
2 Pages
-
BFM 1013
2 Pages
-
DEUTZ TCD 18.0
2 Pages
-
DEUTZ TCD 9.0/12.0/13.5
2 Pages
-
TCD 2012
2 Pages
-
DEUTZ TCD 12.0/16.0 2020
2 Pages
-
TTCD 7.8 L6
2 Pages
-
DEUTZ TCD 7.8
2 Pages
-
DEUTZ TCD 4.1/6.1
2 Pages
-
DEUTZ TCD 3.6
2 Pages
-
TCD 2011
4 Pages
-
DEUTZ TCD 2.9
2 Pages
-
2012 The Genset Engine
2 Pages
-
DEUTZ TCD 2.2
2 Pages
-
DEUTZ G 2.2 - 2.9
2 Pages
-
FL 912
2 Pages
-
TCD 2015M
2 Pages
-
D 2011L
2 Pages
-
D 2011Li
2 Pages
-
2015M
2 Pages
-
TCG 2015
2 Pages
-
TCD 914M
2 Pages
-
DEUTZ Hybrid Drive
2 Pages
-
BFM 2011
2 Pages
-
TCD 2013
2 Pages
-
BFM 1015
2 Pages
-
BFL 914
4 Pages
-
912 The marine engine
4 Pages
-
2015M The marine engine
8 Pages
-
TCD 2013 The genset engine
4 Pages
-
L 2011 The genset engine
2 Pages
-
Flyer Oil Filter
2 Pages
-
Genuine DEUTZ pistons
2 Pages
-
Xchange engines and parts
9 Pages
-
1013M The marine engine
8 Pages
-
1015M The marine engine
8 Pages
-
1015 The genset engine
2 Pages
-
1013 The genset engine
2 Pages
-
914 The genset engine
2 Pages
-
912 The genset engine
2 Pages